SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Anyone here currently running with a Borla exhaust?
If so, what are your feelings on it? I ran across some yt videos of other Subarus with this exhaust setup and it sounded amazing. Although I think part of it has to do with the fact the others were flat 4s. Any yt links to an svx with this setup? I found one but it was a drag race against another car so it was hard to tell.
Also, price spent on said goodies would be nice to know as well. Thanks
__________________
1994 subaru svx le 112k |
#2
|
||||
|
||||
Re: Anyone here currently running with a Borla exhaust?
Does Borla make a bolt-on SVX exhaust? I've been thinking about using their parts for the next system I build on my car, but it would be a custom setup.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#3
|
||||
|
||||
Re: Anyone here currently running with a Borla exhaust?
No. They dont. I believe the only true bolt on exhausts were the kinetic concepts exhaust (discontinued about 10 years ago) and the stebro.
__________________
2009 Volvo C70 T5 2008 Volvo S80 V8 2006 Range Rover Sport 2001 Audi S8 |
#4
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
haha, you must be joking...Stebro??? Bolt on? Yeah after $300 in exhaust shop customizing.
|
#5
|
||||
|
||||
Re: Anyone here currently running with a Borla exhaust?
Well, sometimes they were bolt-on...
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#6
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
maybe, Stebro packages a crap product and their customer service matches it.
For half the price you can piece together your own system and have a fellow member like OT fabricate the rest and you have a very nice system. |
#7
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
I think its the borla unequal length headers that add that sound.
I don't think anyone makes an unequal length headers for an SVX. Here is a tube of equal length headers fallowed by unequal length headers on same car. Here is a set of borla headers on a magnaflow catback, so it seems to be the headers. Skip to 1:10 secs, that first min he just lets the idle settle. SVX with open headers: From the youtube comments: "holy crap it sounds like it wants to eat babies". That made me lol! Last edited by Lookin4SVX; 06-17-2012 at 03:07 PM. |
#8
|
||||
|
||||
Re: Anyone here currently running with a Borla exhaust?
I've bought two exhausts from stebro over the years, and both fit perfectly and were of excellent quality. Their customer service stinks, though. That's for sure.
__________________
2009 Volvo C70 T5 2008 Volvo S80 V8 2006 Range Rover Sport 2001 Audi S8 |
#9
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
I would really like to see someone else's stebro in person. I seem to be in the minority on the stebro exhaust. After significant modification...fitting the straight y pipes with catalytic converters, installing a hi flow main converter following by a resonator (essentially the same layout as the stock system) followed by the stebro muffler I still have significant exhaust noise inside the cabin, not to mention the exhaust vibration travels through the car.
As for quality, stebro used the same type of steel as is used on our stock exhaust system, which i guess is excellent quality considering it lasted 20 years. |
#10
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
The only issue with Stebro seems to be that they used the 97 style post cat flange after the initial production run. (from what I've heard, the initial run/group buy were able to be installed without issue)
This provides a bit of an inconvenience and when fitting a new donut gasket, it seems to have a slight leak for a few months before heat cycling and sealing up just fine. Just my $.02 |
#11
|
||||
|
||||
Re: Anyone here currently running with a Borla exhaust?
Quote:
__________________
http://i840.photobucket.com/albums/z...93705d9zzz.png |
#12
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
did anyone else notice that the hub is turning while its idling in park or neutral or whichever
|
#13
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
It's more common than one would think actually. Just about every Subaru will do that. To the average person, could give a bit of a scare though.
|
#14
|
|||
|
|||
Re: Anyone here currently running with a Borla exhaust?
oh ok hahaha , ive never tried it so i wouldnt know
|
#15
|
||||
|
||||
Re: Anyone here currently running with a Borla exhaust?
It's unfortunate the sound is due to the headers, which means I'll not be able to replicate the sound. Oh well.
__________________
1994 subaru svx le 112k |
|
|