SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
||||
|
||||
Alternative option to replace PCV
The method using the 19mm crow's foot was a bear of a task tonight. I got the pcv valve off but I found a better way to put the new one back on.
Considering I'm replacing the air idle control valve anyways, I removed the throttle body from the intake manifold. This gave me room to use a 19mm deep 6pt. socket by reaching my hand through the back under the intake manifold where the TB is mounted and easily placing the socket on the valve. The wire harness makes it a bit tight but it can move slightly and the hose that connects to the valve can be moved out of the way. I'm not sure if anyone does it a better way without removing the intake manifold, but this was just my experience. |
#2
|
||||
|
||||
Re: Alternative option to replace PCV
That is actually an excellent idea. I think most people are afraid of having to remove and put back the lines going to the intake and throttle body, but once you've done it a couple times, it's easy.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#3
|
||||
|
||||
Re: Alternative option to replace PCV
Any pictures and directions?
__________________
. Earl .... ... .... ><SVX(*> Subaru Ambassador [COLOR=”silver”]1992 Tri Color L[/COLOR] ~45K (06/91) #2430 1992 Dark Teal LS-L ~184K (05/91) #0739 1992 Claret LS-L ~196K (05/91) #0831 1992 Pearl LS-L ~103K (06/91) #1680 1992 Pearl LS-L ~151K (06/91) #2229 1992 Dark Teal LS ~150K (07/91) #3098 (parts car) 1992 White LS-L ~139K (08/92) #6913 1993 25th AE ~98K (02/93) #164 1993 25th AE ~58K (02/93) #176 1993 25th AE ~107K (02/93) #215 1993 25th AE ~162K (02/93) #223 1994 Laguna Blue Pearl LSi ~124K (1/94) #2408 1994 Laguna Blue Pearl LSi ~144K (10/93) #1484 1994 Laguna Blue Pearl LSi ~68K (10/93) #1525 1994 Barcelona Red LSi ~46K (02/94) #2624 1994 Pearl LSi ~41K (12/93) #1961 1995 Bordeaux Pearl LSi ~70K (02/95) #855 1996 Polo Green LSi ~95K (03/96) #872 1997 Bordeaux Pearl LSi ~55K (08/96) #097 2003 Brilliant Red LS1 Convertible ~29K (04/03) #8951 1999 Magnetic Red LS1 Coupe ~33K (04/99) #6420 My Email | Old Locker | New Locker | Picture of 15 of the 19 |
#4
|
||||
|
||||
Re: Alternative option to replace PCV
No I should have, but actually I can take some pictures tomorrow before I put the throttle body back together. I did place the hose back on the PCV valve but I can position where the socket would be when attempting this.
|
#5
|
||||
|
||||
Re: Alternative option to replace PCV
Quote:
I looked to see where the hose routes and I cannot see how to replace this hose because I'm unsure where it connects under the right side of the intake manifold. Has anyone replaced this hose without removing manifold? |
#6
|
||||
|
||||
Re: Alternative option to replace PCV
I managed to change the PCV with just a standard open ended 19mm wrench. *shrug*
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#7
|
||||
|
||||
Re: Alternative option to replace PCV
From above or below?
Mine probably was never changed..I ran out of geometry options when trying from above...also I kept dropping the new valve when trying to start the threads...then I figured up from the bottom is the most sensible way |
#8
|
||||
|
||||
Re: Alternative option to replace PCV
A PITA no matter the *shrug*
__________________
LS-L 92 black top silver bullet-Turned into a 2005 Jeep TJ Unlimited 2012 Outback 3.6R Limited! |
#9
|
|||
|
|||
Re: Alternative option to replace PCV
Quote:
__________________
Cam '92 Ls-L Dark Teal 11:1 CR ECUTUNE pistons ECUTUNE .256 duration intake/exhaust cams ECUTUNE STAGE 2AV1 ECU Z32 MAF/SR20DET injectors Balanced & Blueprinted |
#10
|
||||
|
||||
Re: Alternative option to replace PCV
You can use this.
|
#11
|
||||
|
||||
Re: Alternative option to replace PCV
Or... Just pull the manifold with the fuel stacks attached and replace all those cracking vacuum hoses and aging gaskets.
__________________
1991 SVX L JDM |
|
|