SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Pistons,Rods,Cams for FI Engine
Im looking to build an engine I can call reliable. The stock blocks just dont cut it with a supercharger. Does anyone have these parts anymore? LAN stopped Selling them
__________________
Eric Rebuilt P/S pump info... http://www.subaru-svx.net/forum/showthread.php?t=50918 If your car wont start info... http://www.subaru-svx.net/forum/show...ighlight=click |
#2
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Call cp.... or any other piston company... ir gonna pay but they will make what you desire... rods... eagle or better will make up a matched mset of 6 for u... valves... brian crower
Tom |
#3
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Click the turbo project link in my sig, that should get you started.
The run down is this though: CP pistons 9:1 CR forged pistons complete with rings and wristpins - $1100 6 take-off STi rods - $100 Cometic headgaskets - can't remember, I think they are like $130 now Unless you want to rev a lot higher (which there's really no reason for) then that should do it. You can also get Eagle H-Beam rods for a reasonable price, but you will have to contact them and get a balanced set of 6. They were unresponsive to my emails though.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#4
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Arias Pistons are also available, contact Nick Arias III at atomicspeedware.
__________________
Danny 1994 Silver SVX in hybernation, awaiting for the monsterous awakening (Lebanon) 1967 Mercedes-Benz 250SL Euro Specs, Hard/Softtop, White/Red. Under Complete Restoration 2013 Mercedes-Benz SL350 Euro Specs, White/Red. Mint... Another step into SL Collection. |
#5
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Quote:
Will i be able to run my 12psi pully with that? I think I have meth injection..havent done much under the hood yet. Also headwork cams,valves,springs...I need more input on the subject please if anyone has it. Who?
__________________
Eric Rebuilt P/S pump info... http://www.subaru-svx.net/forum/showthread.php?t=50918 If your car wont start info... http://www.subaru-svx.net/forum/show...ighlight=click Last edited by SomethingElse; 03-02-2012 at 01:59 PM. |
#6
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
I emailed them and asked if they had any and he hooked me up. Try to get some eagle ones first, it's the only place where I "cheaped out". I think you should definitely be able to run 12 psi with that, that's around what I'm aiming for.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#7
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
I called them yesterday and they were out.
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#8
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Manley makes rods too, that's what is in Jack's EG33 Impreza.
|
#9
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
OK I want to make sure I got it all...and where to get it from.
Cometic head gaskets - http://www.cometic.com ARP head bolts - ??? (required?) CP pistons - http://www.cp-carrillo.com Aluminum crank/rod bearings - ??? Rods - rallispec.com (eventually) as far as head work I think im going to rock the stock equipment. I haven't found any threads that says it wont work.
__________________
Eric Rebuilt P/S pump info... http://www.subaru-svx.net/forum/showthread.php?t=50918 If your car wont start info... http://www.subaru-svx.net/forum/show...ighlight=click |
#10
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
I may have found some STI rods for next to nothing. From what I read they are forged..if they come on a stock 300hp engine I think they will work just fine for my application.
__________________
Eric Rebuilt P/S pump info... http://www.subaru-svx.net/forum/showthread.php?t=50918 If your car wont start info... http://www.subaru-svx.net/forum/show...ighlight=click |
#11
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Quote:
for less than $200.00 a pair.
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#12
|
||||
|
||||
Re: Pistons,Rods,Cams for FI Engine
Quote:
If you don't need stronger rods, then stick with the lighter ones. Depends on what you're planning in terms of power. It seems like you're capped to 12 psi, due to the pulley setup. Maybe some ARP rod bolts are a good idea.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
|
|