Various technical photos required

[dynomatt]

G'day guys,

I'm in the process of doing some work on an approval paper for the SVX rally car in Australia. Part of this, is to prepare a set of papers equivalent to the FIA Homologation Papers which basically record every detail about the car so that the vehicle can be accurately assessed.

Accompanying the papers are a range of photos which I need. Can I please ask you all to check your hard drives to see if you've already got some of these?

1. Right hand side of engine out of car
2. Left hand side of engine out of car
3. Piston
4. Conrod
5. Bare cylinder head
6. Combustion chamber
7. Intake manifold showing injection system removed from engine
8. Exhaust manifold removed from engine
9. Complete exhaust system removed from vehicle
10. Transmission external photo removed from car
11. Front stabiliser bar
12. Rear stabiliser bar
13. Complete front crossmember including axles
14. Complete rear crossmember including axles
15. Front brakes
16. Rear brakes
17. Dashboard
18. Sunroof

[Hocrest]

Originally Posted by dynomatt

1. Right hand side of engine out of car
2. Left hand side of engine out of car
3. Exhaust manifold removed from engine
4. Complete exhaust system removed from vehicle
5. Transmission external photo removed from car (what trans? 5spd??)
6. Front stabiliser bar (out of car?)
7. Front brakes (out of car?)
8. Rear brakes (out of car?)
9. Sunroof (out of car?)

I can shoot these in my basement tomorrow if they aren't covered by then...

[svxfiles]

05)

[svxfiles]

03) & 04),
http://www.subaru-svx.net/photos/use...svxfiles|41289

[svxfiles]

08) Manifolds from SVXRide's locker.
http://www.subaru-svx.net/photos/fil...Ride/25773.jpg

[SVXRide]

Matt,
I think you'll find most of these pics in my locker. Let me know if there are any you can't find...they're probably on my hard drive and I'll just have to uploaded them.
-Bill

[svxfiles]

09) is 05-09)
15) is 10 and 12
16) is 11
http://www.subaru-svx.net/photos/use...svxfiles|41289

[dynomatt]

Cheers for this gents...that's excellent.

The trans has to be the auto, but I'm also doing a separate section on the 6 speed because they've approved the installation of that for my class. However, I've got to take it out to fit the 4.44's, so will do that then.

I'll confess, I was being a bit lazy and was hoping people would know they had some photos...but for the ones that are missing, I'll trawl the lockers as I'm sure they're all there.

Thanks again,
Matt

[dynomatt]

Originally Posted by Hocrest

I can shoot these in my basement tomorrow if they aren't covered by then...

Front and rear stabiliser bars would be great if you could? Out of the car if you have them? Otherwise I can just as easily get under my car.

Thanks,
Matt

[SVXelerator]

Mr. SVXRide does indeed have a proverbial cornacopia of interesting pictures - as does Mr. SVXFiles!

I believe this is the rear bar with the end links removed:

http://www.subaru-svx.net/photos/fil...Ride/21205.jpg

[svxfiles]

Originally Posted by SVXelerator

Mr. SVXRide does indeed have a proverbial cornacopia of interesting pictures - as does Mr. SVXFiles!

Yea, but mines bigger!




My locker.

[SubaruPartsGirl]

I have part diagrams and such if that would be any help to your project.

E-Mail me: Jackie dot Whetzler at AnnappolisSubaru dot com

No spaces of course...

[Chiketkd]

I didn't see you ask for this, but figured I'd post the pic in this thread ust in case someone needs it in the future - SVX crankshaft:

[svxfiles]

Originally Posted by dynomatt

The trans has to be the auto, but I'm also doing a separate section on the 6 speed because they've approved the installation of that for my class. Matt

13-18 are good shots of a 2004 STI 6 speed.
http://www.subaru-svx.net/photos/use...svxfiles|41289