SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#2
|
||||
|
||||
Re: Anyone have a decent aftermarket source for OEM lugnuts?
Quote:
LMK by PM since I'll be out of the house all day, but PMs go to my email, which goes to my phone.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#3
|
||||
|
||||
Re: Anyone have a decent aftermarket source for OEM lugnuts?
Just buy his ^^.
OEM style are hard to come by in our fitment. Toyota uses the same type, but they're 12x1.5 studs.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#4
|
||||
|
||||
Re: Anyone have a decent aftermarket source for OEM lugnuts?
I'm going to try and buy them from icingdeath...
However, for the rest of you that find this thread and are upset that it was not helpful... I found these http://www.summitracing.com/parts/SUM-7540080/ which should work. Basically, 12x1.25 and "mag" or flat seat with shank will work with the oem wheels.
__________________
Greg 97 Red SVX LSi clean 96 Black SVX LSi beater 90 Red Eclipse GSX track ho 99 Ford F250 work horse My Locker |
#5
|
||||
|
||||
Re: Anyone have a decent aftermarket source for OEM lugnuts?
I don't know about those... Have you measured the shank length on the OEM lug nuts? Those might be too long and not allow the nut to tighten down all the way.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#6
|
|||
|
|||
Re: Anyone have a decent aftermarket source for OEM lugnuts?
I also have a bag with probably near 100 lug nuts...
|
|
|