92 rwd turbo auto

#1 03-10-2006, 02:05 PM

92 allweel car that is converted to rwd and forced air tech did the turbo 4 years ago the car need a little work on wiring and the crossmenber on the radator the uper one is bent i have a one to install and it need the driver door step is gone. i want 2500 obo i am in AZ phx my cell is 602 628 6029 my email is army_67romeo@yahoo.com ... i have pic if you email me for them i dont know how it post them here

lhopp77 · #2 03-10-2006, 03:32 PM

What kind of tranny are you running? If you have simply removed the axleshafts from the front, I fail to see how you gain anything. It obviously also has a lot to do with the value of the car.

Lee

AvPPoW · #3 03-10-2006, 06:30 PM

bump for something you don't see everyday

#4 03-11-2006, 12:11 PM

being rwd makes it easy to change gears in the rear.It was a drift car ..it ran 13's in the 1/4 ... you can change the car back with a new trans diff it takes 45mins to change with a lift i have the front CV's the part is $480 new .. the trans have some upgrades to it . i tell you what i am move it to a new house i will sell it for $2000 if any one can get it before fri march 17

TomsSVX · #5 03-11-2006, 12:31 PM

do you have any pictures of the car/turbo setup. As far as I knew, only one FAT kit was sold and I know the guy who owns it

Tom

#6 03-11-2006, 05:23 PM

i know the guy too i live at 67ave and cactus and the shop is at 28ave and cactus the shop is only 5mile away ... the kit was made by him it was $4800 when he last sold them. He will now make them any more he dosent have the jigs for it ant more ... the turbo is a t-3 t-4 hybrid it's is set for 5 to 6 lb of boost any more will over run the maf .... i think it needs to be changed to a 300z maf and a translator box ... and there is a company in tucson that does a turbo kit to http://store.yahoo.com/svx-motorspor.../turbokit.html IT's is my kit http://www.forcedairtech.com/turbokits_svx.html aka FAT i talk to the forced air tech many times for help find out how the car was moded he told me the first kit was sold to a guy is FL and that was the start of his company he told me he did a **** load of kit he said he did so many it was sick .lol i car was the first production kit ... the later kits had the pipe split and go to each throttle body.Mine goes to the stock plasic box the is on the throttle body ... IF any one just wants the kit call me i will take it off with the FMU and every thing you need and pipes a **** every thing but i what 2000 .. so take all or Part if your on the east cost you will sell part ok Call me if you have and ? 602 628 6029

It's Just Eric · #7 03-11-2006, 09:10 PM

Quote:

Originally Posted by army67romeo

I know that guy too! The shop is only five miles away ... I live at 67ave and Cactus, and the shop is at 28ave and Cactus. The kit was made by him and it was $4800 when he last sold them. He does not make them any more because he dosent have the jigs to make them any more.
The turbo is a T-3/T-4 hybrid. It's is set for 5 to 6 lb of boost; any more will over run the MAF. I think it needs to be changed to a 300z maf and a translator box .There is also a company in Tucson that does a turbo kit too.
http://store.yahoo.com/svx-motorspor.../turbokit.html It is my kit
http://www.forcedairtech.com/turbokits_svx.htmlaka FAT.
I talkd to the forced air tech many times for help to find out how the car was moded. He told me the first kit was sold to a guy is FL and that was the start of his company. he told me he did alot of kits. He said he did so many it was sick! lol
My car was the first production kit ... the later kits had the pipe split and go to each throttle body.Mine goes to the stock plasic box that is on the throttle body.
If any one just wants the kit call me, I will take it off with the FMU and every thing you need.Even the pipes! and pipes a pain! Either way,I want 2000$ .. so take it all and part it. If your on the East cost ,you will sell parts easilly. Call me if you have any questions (602) 628-6029

Fixed your post.

curly2k3 · #8 03-12-2006, 07:36 AM

how much for the kit? I am very, very interested in buying just the turbo set up.
you can email me too... curly2k32007@hotmail.com, name your price, I am about to turbo my car and this would save me A TON of time, please get back to me soon

Chris

immortal_suby · #9 03-13-2006, 04:24 PM

here are the pics of this car (emailed to me from army67romeo)

AvPPoW · #10 03-13-2006, 04:54 PM

No engine bay pics?

TomsSVX · #11 03-13-2006, 05:05 PM

Quote:

Originally Posted by AvPPoW

No engine bay pics?

Doesn't surprise me

Tom

lhopp77 · #12 03-13-2006, 05:09 PM

I would say this car has been wrecked considering the pretty severe body part alignment problems. I guess that might be implied in the first posting, but is not clearly stated as it should be.

Lee

AppStateSVX · #13 03-17-2006, 08:42 PM

i'm interested, but honestly, I can't understand a word you are saying. Could you send some engine bay pics and interior to cb71216@appstate.edu.

I mean, it sounds decent and all, but.....please, use some punctuation to help us all.

#14 03-20-2006, 02:36 PM

hey any one who wants more info call me pls i cant spell call me on my cell any time day or night 602 628 6029 or send me your number ....i will try to et some motor pics soon

SVXfan01 · #15 04-04-2006, 12:24 AM

How much does he want for this car? Or is it already sold?