Wheels that fit the SVX

[XT6Wagon]

Originally Posted by Nemesis Destiny

Another that I discovered much more recently, and sounds much better, actually is this. Having worked in a car shop for several years, it doesn't look too hard at all, and the results seem promising. If what he says in the early part of the post is actually feasible, this would allow you to use STi brakes with some additional work. That's very exciting.

It eliminates some of the work, as using the proper 05+ STi strut or coilover system removes the need to machine up your spindle. I haven't checked yet to see if the SVX is on the old legacy/impreza top hat bolt pattern or not, as if it is, that would provide us with top hats for any solution without needing to drill new holes.

Still using 2005+ STi spindles should be done with its matching 6spd as this minimizes the needed new parts outside of the donor car.

[XT6Wagon]

Originally Posted by MarquisDePosa56

Ok, time to make the tire decision, I've got my rims sorted.

I'm leaning to Yokohama S-Drives.

If anyone thinks this is a bad marriage or there is a significantly better one that I should check out, speak now or forever hold your peace!

Be mindful of the fact that if you offered to give me Pirelli's I'd decline the offer

The new michelin Super Sports are supposed to be insanity incarnate. Oh and they have a tread wear warrenty now too, unlike any other tire in its class. Course you pay more up front, but its worth it if they even remotely come close to thier advertising.

[smc]

18x8 wheels from an 2008 STI fit Beautiful. I just slipped these shoes on today. Stock height suspension. Tires are 245/40r18. Zero clearance issues. Go get'em fellas.





Im SOoooo happy with how these turned out.

[icingdeath88]

^ Those look great. Neat paint job too.

[Conn SVX]

Not a HUGE fan of gold but on that car it works . Maybe because the teal or the wheels are not the real brass GOLD

[smc]

Gold seems to work well with the teal color. It was either that or I was going to go black like the top of the car. But it seems to complete the car with that paint.
It nice to have my ol'SVX back again Missed it so much.

[WYOSVX]

'05 Sti wheels: 17x8 BBS, 55 offset, bought online for about $850 with shipping. Not a scratch on them.

Continental Extreme Contact DWS 235/45 17. No rubbing except when I hit a very big dip, the rear taps the inner plastic wheel well.

Very happy with the look. Wasn't sure I would be as I was looking at SSR Professors but glad I saved the $ for other mods later. So far, the Conti's are great. Snow/ice should put them to the test soon.

http://www.cardomain.com/ride/393738...x-lsi-coupe-2d

[Uncamitzi]

Wonder if anyone can help ID these wheels... I've checked American Racing sites and been through this thread...can't find which model AR wheels these are... I pulled them off a 92 in a pick and pull here in Salt Lake. They are 17" the tires on them...vary from 235/45 R17 94H p215/50 R17 93v (and finally ) 235/45Z R17 94W
(wonder why it was in the junk yard?)

[Nemesis Destiny]

Those look really familiar. I think I was looking at a set of those a couple years ago. I can't remember what they're called, but if they're the ones I think they are, they're actually half-decent considering the brand.

[wolfboy]

Will 17x8's with 225/45/17 and +48 offset fit?

[Nemesis Destiny]

Probably. I have 17x8 with 225/45/17 and +42 offset, and there is still some room. I should note that it's on lowered coilovers as well - still fits

[wolfboy]

Thanks! There's a set of rota's wrapped in fresh allseasons for $800 i'm looking at.

[Alcyone Lunacy]

Can anyone help,

Looking at a very nice set of rims used with good tires.

Size of the rim is 18 X 8.5 with a +50 offset and 114pcd

Tires are a Bridgestone RE01-R 235/40/18

Would these fit ok without rubbing issues?

Please anyone?

[Nemesis Destiny]

I can't say for sure, but my gut tells me that would be a tight fit - those are some wide rims, and with a +50 offset, they might not clear your suspension. Also, if your suspension is stock, they might rub on bumps.

This is all just a guess on my part though.

I run an 8" wide rim with a +42 offset and I get no rubbing or clearance issues, but those tires are a half inch bigger diameter and slightly wider than mine, so I can't say for sure.

There are lots of folks on here that have mounted 18s in the past, but usually narrower rims. The stock 18s from the Nissan Murano were briefly popular, for example. All I can suggest it try them out and if they don't fit, resell them

[92 SVX]

Originally Posted by Alcyone Lunacy

Can anyone help,

Looking at a very nice set of rims used with good tires.

Size of the rim is 18 X 8.5 with a +50 offset and 114pcd

Tires are a Bridgestone RE01-R 235/40/18

Would these fit ok without rubbing issues?

Please anyone?

I think the problem here will be the 235/40/18 tires, that is a wider and taller tire then stock, it will affect your speedometer as well.
I think if you went with a lower sidewall, maybe go down to a 225/4018 which is the close to the stock rolling size you may be ok.

or if you want the 235/ or even 245/ go with a 35 sidewall

looking at tire size calc
http://www.1010tires.com/TireSizeCalculator.asp

I think 245/35/18 may be perfect for you, the overall diameter will be .10 inch smaller then stock which will gain you a bit of clearance and keep the wider rim happy at the same time.