SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Custom DIN slot cup holder
I just completed my custom cup holder. It is made from Plexiglass. I replaced the double din stereo with a single din Pioneer. I put that in the lower din slot. In the upper din slot I installed a pocket. There are two upper and two lower rubber foam strips on the sides of the plexiglass to hold it firmly in the pocket and provide some stabilization or shock absorption. There are two plastic clips holding a steel rod which swings down to hold straight sided bottles. There is a Neodymium magnet glued to the plexiglass to hold the steel rod out of the way for tapered travel mugs.
__________________
Tony 1996 Polo Green Subaru SVX LSi, 168,XXX miles, Redline D4 ATF, Redline 75W90 gear oil, K&N HP-4001 Oil Filter, Mobil 1 5W50 FS (3qt) and 5W30 High Mileage (4qt) Oil Blend, Motul RBF600 Brake Fluid, AC Delco A975C Air Filter, NGK BKR6EIX-11 plugs, Centric Rotors, Power Stop Evolution Carbon Fiber Ceramic Brake Pads 2005 Gray Acura RL, 165,XXX miles, Redline D4 ATF with Lubegard Platinum Protectant, Mobil 1 5W20 High Mileage Extended Performance Oil 2009 Red Toyota Venza, 123,XXX, Mobil 1 5W30 High Mileage Oil 1992 Red Ferrari 348 ts, 82,XXX, Redline everything Last edited by Huskymaniac; 08-25-2013 at 12:33 PM. |
|
|