Headers on ebay

[redlightningsvx]

http://cgi.ebay.com/ebaymotors/Subaru-EG33-Ehaust-header-primary-pipes-SVX_W0QQitemZ300323199589QQcmdZViewItemQQptZMotors _Car_Truck_Parts_Accessories?hash=item45eca85a65&_ trksid=p4506.c0.m245&_trkparms=65%3A10|39%3A1|240% 3A1318

[1986nate]

Doesn't look like its going to really be any type of an upgrade/improvement from stock

[Gamesy]

its also a 3bolt flange, unless mine is diff, we have a 2bolt

[1986nate]

Originally Posted by Gamesy

its also a 3bolt flange, unless mine is diff, we have a 2bolt

That doesn't matter though, you would have to modify the rest of the exhaust as well as these would go further back than the stock manifolds. The flanges shown lower in the pic would need to be welded on the next set of pipe before the precats.

[SomethingElse]

no installed pics

I wonder how well they clear the cross member.

[TomsSVX]

Originally Posted by SomethingElse

no installed pics

I wonder how well they clear the cross member.

They don't. notice the auction lists them for the engine not for the car. Thats because you might be able to use them in a vanagon or something it was swapped into

Tom

[svxfiles]

Originally Posted by SomethingElse

no installed pics

I wonder how well they clear the cross member.

These headers are for a EG33, but not an SVX...

But, do not cross these guys off of the list yet.

I am in contact with them and have sent them some of our requirements.

If they can/will make some headers that will "MOSTLY" bolt into a performance exhaust, then this is FREEKLIN GREAT!!!!!

I will find out more (maybe tomorrow), and report back!

[Gamesy]

Originally Posted by 1986nate

That doesn't matter though, you would have to modify the rest of the exhaust as well as these would go further back than the stock manifolds. The flanges shown lower in the pic would need to be welded on the next set of pipe before the precats.

ya good point