SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
S/C ''kit'' how many?
How manny supercharger kit from the old ecu tune was build?
And are the some one that is for sale and what is the price for one of these kit? I have seen few kits for the 3.0L H6 but i dont know if these will fit the svx.
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#2
|
||||
|
||||
Re: S/C ''kit'' how manny?
I have look on the other forums.
Was the only buld 3 ECU stage3?
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#3
|
||||
|
||||
Re: S/C ''kit'' how manny?
I had the original kit. I paid up front for it so he had the money to develop it. I put up $5500 and waited about 8 months to get it. I think the rest were sold at $6500. I don't know how many were produced, but I do know that they were only made to order, so you won't find any not already installed on a car. Sold it with my SVX a couple years ago.
|
#4
|
||||
|
||||
Re: S/C ''kit'' how manny?
Quote:
__________________
92 pearl SVX about to revive 92 Black 4ws (Jap spec) SVX 93 black SVX 93 Liquid Silver SVX - sti 6 speed with R180 diff, my05 sti steering wheel, sti alloy lateral links, 19x8.5 275/30 42mm offset front and 19x8.5 275/30 22mm offset on the rear, 6 pot brembo caliper with 355 rotors front, 2 pot brembos rear 95 bright red SVX 96 emerald pearl SVX about to revive |
#5
|
||||
|
||||
Re: S/C ''kit'' how manny?
I believe 6 were built. Could be wrong though.
-Mikecg -TomsSVX-->Letitsnow-->?? -Duckie-->sicksubie-->Nate (I believe) -Dessetrunner -Did LAN keep one? -???
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#6
|
||||
|
||||
Re: S/C ''kit'' how manny?
Quote:
Thanks for answere.
__________________
Alexander (Norway) My subarus: 1992 Svx LSI 5-MT(3.54) 1998 Legacy BG 2.5L GX |
#7
|
|||
|
|||
Re: S/C ''kit'' how manny?
Quote:
Jsvxstyle-Halistan TomsSVX-Letitsnow-Something else Desertrunner Duckie-sicksubie-guy in Maine LAN-whoever he sold this kit to There may be one more. I do not recall anymore. I stopped following this years ago. Alex, you can still get the superchargers from Lysholm in Sweden. May even be a local dealer for them. make a custom intake manifold, get a stand alone ecm, custom custom custom. All in all, doing a turbocharged setup will be much easier and cheaper to fabricate. You could try doing a remote mount supercharger setup as many have done with EJ22/25 engines typically running an eaton M90 supercharger and would allow for running an intercooler. The M90 however is a bit too small on the EG33. Using an M112 from a supercharged Jaguar would be more ideal, however they're not as cheap but still much cheaper than a twin screw design that the Lysholm is. |
|
|