Swaybar end link adjust

Tiamat-red · #1 01-21-2007, 06:11 PM

With the slightly adjustable endlinks on the stock front swaybar does it matter
where they are?
Assuming I want my car to go straight and is in good alignment is there a difference if they are both up, or down in the slots?

Tiamat-red · #2 01-22-2007, 05:38 AM

Anyone?
Bueller.....bueller?

svxfiles · #3 01-22-2007, 08:19 AM

Unless you are setting the car up for only left or right turns, then adjust where there is no preload.

Tiamat-red · #4 01-22-2007, 08:43 AM

Right, but would it matter if they were both all the way up, or all the way down?
I assume if they are both in the same spot, and everything else is equal in the suspension then it wouldn't.
I assume then that the adjustability is in case the left and right suspension AREN'T equal.
So I guess I answered my own question.
Or rather I assume I did.

Tiamat-red · #5 01-22-2007, 08:57 AM

Since my front end is too low to get on my ramps could I do it just by turning the wheels and unbolting both sides, then bolting them back wherever they "fall"?

Suby Fan · #6 01-22-2007, 09:26 AM

no adjusting your sway bars will not adjust your ride hight

svxfiles · #7 01-22-2007, 09:27 AM

Quote:

Originally Posted by Tiamat-red

Since my front end is too low to get on my ramps could I do it just by turning the wheels and unbolting both sides, then bolting them back wherever they "fall"?

Or you could put a 2X12 in front of the ramp.

But yea, loosen them, and tighten where they fall.

Bolt them up when the wheels are strait just to be safe.