SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Torque specs for rear subframe bolts
So the service manual calls for 94-116 ft-lbs on the "Crossmember to body bolts". I assume those are the four large ones that go through the subframe. Does anyone know what the specs are for the shorter bolts that go through the secondary parts? (two brackets in front of the subframe, two behind as well as the swaybar mounting brackets). There is a spec for the "crossmember support bolts", but it's only 33-54, which seems a little low to me.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
|
|