Disconnecting Rear Driveshaft for Towing ?

stallion · #1 08-22-2009, 02:23 PM

Hi All,

I was wondering if anyone could give me a quick How-To to go about this to prepare the SVX for towing (and anythign else I need to do). I did a search and couldn't find nada, only suggestions about doing it in order to tow... but nothing indepth for the mechanically-challenged lol.

svxfiles · #2 08-22-2009, 02:36 PM

Quote:

Originally Posted by stallion

Hi All,

I was wondering if anyone could give me a quick How-To to go about this to prepare the SVX for towing (and anythign else I need to do). I did a search and couldn't find nada, only suggestions about doing it in order to tow... but nothing indepth for the mechanically-challenged lol.

Assuming that you are going to use a tow dolly so that the front tires do not contact the ground/road, just remove the four driveshaft nuts at the driveshaft flange to rear differential flange with a 12mm wrench.
Then move the driveshaft aside and secure it to , say the exhaust so that it does not rub against the spinning read diff flange.
If you are NOT using a tow dolly, let us know as the procedure is different.

stallion · #3 08-22-2009, 03:29 PM

Quote:

Originally Posted by svxfiles

Assuming that you are going to use a tow dolly so that the front tires do not contact the ground/road, just remove the four driveshaft nuts at the driveshaft flange to rear differential flange with a 12mm wrench.
Then move the driveshaft aside and secure it to , say the exhaust so that it does not rub against the spinning read diff flange.
If you are NOT using a tow dolly, let us know as the procedure is different.

This is EXACTLY what i was looking for. Thanks a million!!!!

NiftySVX · #4 08-23-2009, 06:46 PM

Be careful because the car will drag the back bumper on the ground easily, they warn you in the owners manual about it. I've seen this happen with a SVX on a tow truck.

svxfiles · #5 08-23-2009, 07:21 PM

Quote:

Originally Posted by NiftySVX

Be careful because the car will drag the back bumper on the ground easily, they warn you in the owners manual about it. I've seen this happen with a SVX on a tow truck.

But it should never happen with a tow dolly.

Green1995SVX · #6 08-23-2009, 09:21 PM

Quote:

Originally Posted by NiftySVX

Be careful because the car will drag the back bumper on the ground easily, they warn you in the owners manual about it. I've seen this happen with a SVX on a tow truck.

Nate-

A tow dolly will not generate nearly a steep enough angle to cause the rear bumper to scrape.

Mike

NiftySVX · #7 08-24-2009, 10:32 AM

No it wouldn't, but I felt it should be noted as useful and relevant information should anyone be reading or come across the thread searching for what they might need to do if they were going to tow the car with 2 wheels off the ground, in case someone disregarded the warning about doing so because they assumed that it was simply because of the AWD. I experienced this exact thing happen when someone had their FWD 94 towed to me, the back bumper was ground down and the exaust was damaged. The owner had to pay to have it fixed, and he said he knew that the car wasn't supposed to be towed that way but that he thought that applied to AWD models only.