SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#31
|
||||
|
||||
Re: transmission cooling questions
Quote:
2) I mount them dead center. 3)Between the condenser and the radiator. 4)When you disconnect the stock hoses drip happens... 5)I like/love BG Products ATF! 6)Up to twelve quarts if you completeley drain it. 7)3/8" ATF line.
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#32
|
||||
|
||||
Re: transmission cooling questions
Make sure that the lines are not going to get pinched/chaffed/abraded on the exposed mounting bolts on the drivers side!
__________________
www.svxfiles.com The first SuperCharged SVX, the first 4.44 gears, the first equal length headers, the first phenolic spacers, the first Class Glass fiberglass hood, the first with 4, 4.44s in his driveway Fiberglass Hood thread My locker 4.44 Swap link |
#33
|
|||
|
|||
Re: transmission cooling questions
Thanks svxfiles
|
#34
|
|||
|
|||
Re: transmission cooling questions
One thing to remember: position the cooler outlet so that the system will bleed itself.
So either both inlet and outlet pointing up or sideways so that the cooler inlet is at the bottom. Kind regards, /T |
#35
|
|||
|
|||
Re: transmission cooling questions
Quote:
DAAANG!! SVXCess, I just looked at that picture of yours and went out to look at mine....Original lines and original Campaign filter is still there!! It wasn't sent back on recall!! My car is ancient! 🤔 |
|
|