Closing Machine Shop - everything must go!

[green_eyed_lady]

While inventorying the leftovers on the "manual" machining half of the shop today, I came across some stuff that I considered to be unusual. i.e., they would be valuable to someone who had a specific use for them. We have had a guy in here hauling out scrap metal & remnants for the past week or so. If this miscellaneous stuff doesn't go to someone who can use it, it WILL go for scrap! I am listing this here in case someone has some use for this stuff. If there's anything you want, LET ME KNOW QUICKLY and I will put it aside before the scrap guy comes back in here and starts hauling stuff away again.

Here are the items:

(1) 1/2" X approx. 6' long brass rod
(2) 7/16" square steel bars approx. 6' long (might be key stock?)
(1) 3/8" X 1/4" bar approx 6' long (again, might be key stock?)
(2) 8" W X 2-1/4" D U-channels approx. 12-15' long
(2) 3" angle, stainless, approx 10-12' long
(1) 1-7/8" OD 6061 (Aluminum) Schedule 40 pipe approx. 12' long
(1) 6" X 4" Angle (steel) approx 4-5' long
(3) 3/8" OD (1/4" ID) stainless tubing approx. 6-7' long + assorted smaller pieces
(6) 1/4" OD stainless tubing approx. 6-7' long + assorted smaller pieces

I know these are weird things to have laying around, but this forum has a large membership with varied "hobbies".

PM me if you need more info on any of the items or if you want me to put something aside for you. I can bring the stuff home and hold it until somebody can pick it up. (That is , unless Tom finds some use for it. )