SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Rear Differential Bushings.
hi. i'm new to the svx forums, and was wondering if anyone could help me with a problem. i have a 92 svx lsl, and get a clunk from the rear diff, that i've narrowed down to the rear diff bushings. my question is, would anyone know where i can buy these? i've seen the mod posted for the whiteline bushings, is that my only option? thanks in advance for any assistance.
|
#2
|
|||
|
|||
Re: Rear Differential Bushings.
Definitely a dealer item. Lots of members use subaruparts.com, and iirc, 1stSubaruparts.com, for discounted parts prices. Do a search for others in your area. I've been happy with the 1st vendor for some years.
Glenn
__________________
"The only thing necessary for the triumph of evil is for good men to do nothing" Aaron Burke 1993 25th Anniversary Edition #63 of 301. R.I.P. Rojo 7/24/2008 She saved my life! 1997 Ebony Mica Pearl LSI. BLACKBERRY 1998 5-Spd Legacy GT Wagon in Glacier White: NUBURU 2005 Cadillac STS in Sandstorm Metallic: STORMY Veteran and farthest traveler of 1st SoCal2MuseumsMeet2010. http://www.subaru-svx.net/photos/user.php?RojoRocket |
#3
|
||||
|
||||
Re: Rear Differential Bushings.
The whiteline bushing insert option is a cheap and easy way that could work just fine. The actual bushings are a PITA to change, not really something you can DIY. And the bushings themselves are kind of expensive. So might as well try.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#4
|
||||
|
||||
Re: Rear Differential Bushings.
I only sell the "harder-to-install" complete bushings that need to be pressed in like the stock ones. They will also never tear since there's no gaps like stock.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#5
|
|||
|
|||
Re: Rear Differential Bushings.
thank you for the reply. i think i'd like to purchase the press-in, harder to install bushings....as my best friends are suby master techs, and love a challenge. how would i go about making the purchase? and obviously, how much are they? thanks.
|
#6
|
||||
|
||||
Re: Rear Differential Bushings.
$75, Paypal/cheque (check your PM)
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#7
|
|||
|
|||
Re: Rear Differential Bushings.
I loathe bringing up dead threads, but it's better than starting a new thread on a subject that's been covered before.
I'm trying to replace these bushings (for obvious reasons): I THINK the part number for these is 41322PA000, but can anyone verify before I order them? Thanks! |
|
|