6spd swap started

[sicksubie]

I started my six speed swap finally yesterday.. Got the rear end done and installed minus axle nuts. Here are some pics

Center concole removed


Empty rear end


R180 rear with driveshaft flange removed and R160 with Flange still on


Removing the R160 Flange to put on the R180 rear diff.


The mounting studs that go out the back of the rear diff were too short on the R180 so I swapped the studs with the ones from the stock R160. The R160 mounting bolts are on the left and the stock STi ones are on the right


The rear going up into the car