EG33 Head Dissection

[neverLift]

Thanks to the generosity of Crazy_pilot here on the boards, I had an extra EG33 head that I was able to steal some parts (lifter liners as they're not available on their own from Subaru) I need for my engine rebuild.

Since the head itself was not useable, I figured I'd make it useful and cut it up. Slicing it at various locations, it gives a decent idea of port shape, wall thickness and proximity to water jackets. This should come in handy for future head porting.

If anyone wants different/close-up photos or a section cut in a different/thinner to see a specific area, let me know and when I have a chance I'll try to make it happen.

Each section has a photo of its left and right face. LH face (towards front of head) photos are always the first of the pair.












cheers
-Evan