SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
||||
|
||||
Stainless steel brake HARD lines
Does anyone know if it's possible to get stainless steel hard lines? I need to replace one of my front lines, and I should re-do the hack job replacement some previous owner did of my rear lines. Factory replacements are actually not expensive at all, but it there are stainless available I'd like to pick up some and bend them to shape.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#2
|
|||
|
|||
Re: Stainless steel brake HARD lines
Why not try coating the stock lines?
__________________
1992 Liquid Silver/Black LSL LeveL10 Stage 3 Trans and associated stuff |
#3
|
|||
|
|||
Re: Stainless steel brake HARD lines
I though the stock lines WERE coated? Mine are...
__________________
'92 Liquid Silver SVX - Drilled&Slotted Rotors/Canadian OEM Seat Warmers/JDM Folding Mirrors/JDM Clear Corners/Euro Glass Headlights/Euro Headlight Level Adjustment/Euro Shifter Assembly/ECUTune Chip V.1/GARAGE QUEEN! |
#4
|
||||
|
||||
Re: Stainless steel brake HARD lines
Yes, they're rubber coated up about an inch before they end, but I have to replace a few of them, and I like stainless.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#5
|
|||
|
|||
Re: Stainless steel brake HARD lines
Oh, well my replacement lines weren't coated because I just bought lenghts of line and made my own. They were galvanized though. I am thinking the ribber is GREAT as long as nothing gets underneath it, then all it does is hold moisture against the lines.
I was reffering to more or less buying bare lines and painting them with engine paint and clear coat. Stainless anything isnt cheap
__________________
1992 Liquid Silver/Black LSL LeveL10 Stage 3 Trans and associated stuff |
#6
|
||||
|
||||
Re: Stainless steel brake HARD lines
Huzzah! Jegs sells straight lengths from 8-72" for $9-$30. What size lines and fittings does the SVX use?
http://www.jegs.com/p/JEGS/758028/10002/-1
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
|
|