SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
Front knock Sensor (1)
Need one knock sensor for the front, by the alternator.
Hopefully this'll cause my car to lose it's misfire and shakiness. |
#2
|
||||
|
||||
Re: Front knock Sensor (1)
Rock Auto has them for $28.
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#3
|
||||
|
||||
Re: Front knock Sensor (1)
oh reary? Thank you!
|
#4
|
||||
|
||||
Re: Front knock Sensor (1)
NP, do a search for "rock auto discount code" to save 5%.
__________________
Dave - 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0 |
#5
|
|||
|
|||
Re: Front knock Sensor (1)
Are you sure it's a knock sensor and not a faulty spark plug wire/connection...that was my issue, switching out the plug and resolved the problem...GL
|
#6
|
||||
|
||||
Re: Front knock Sensor (1)
replaced all my plugs about 50miles ago.
|
#7
|
||||
|
||||
Re: Front knock Sensor (1)
Maybe one of the new ones started off bad.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#8
|
||||
|
||||
Re: Front knock Sensor (1)
Im hoping that by replacing all my valve gaskets, and the front knock sensor(which has a crack in it) will resolve this..if not, I'll look into finding out which plug is being a pain in the buttocks.
any other suggestions? |
#9
|
||||
|
||||
Re: Front knock Sensor (1)
How can I get it out?
|
#10
|
|||
|
|||
Re: Front knock Sensor (1)
From the looks of it, a combo wrench should do the trick...
If you got a camera down there I am assuming you can fit your hand.
__________________
Cam '92 Ls-L Dark Teal 11:1 CR ECUTUNE pistons ECUTUNE .256 duration intake/exhaust cams ECUTUNE STAGE 2AV1 ECU Z32 MAF/SR20DET injectors Balanced & Blueprinted |
#11
|
||||
|
||||
Re: Front knock Sensor (1)
iphone, and i can BARELY get my hand in there. 12mm combo wrench is just a bit too short. Plus, the sensor thats in front of it where the knock sensor plugs in, is in the way.
|
#12
|
|||
|
|||
Re: Front knock Sensor (1)
Did you remove the alternator?
__________________
Cam '92 Ls-L Dark Teal 11:1 CR ECUTUNE pistons ECUTUNE .256 duration intake/exhaust cams ECUTUNE STAGE 2AV1 ECU Z32 MAF/SR20DET injectors Balanced & Blueprinted |
#13
|
||||
|
||||
Re: Front knock Sensor (1)
yes..I cant get the bolt to budge
|
|
|