TURBOs!?

[Crazy_pilot]

Originally Posted by Sanosuke

Anyone here Bore/stroke/port+polish?

Know anywhere I can look at the stock specs and pieces?

As far as I know, the stock SVX block is not "Bore-able". Between the open deck design and the sleeve wall thickness, there isn't enough to remove and still have a strong enough cylinder to stand up to 600 HP worth of boost.

Here's a video of a re-sleeved EG33 half-block being milled.



I believe YT looked into the costs of re-sleeving, but they turned out to be fairly drastic.

Now with an engine like that you might be able to bore it out a bit, but the thickness between cylinder is not going to allow much room to work.