SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#211
|
|||
|
|||
Re: CAI Feeler
patience is a virtue grasshopper.
ooooooooohhhhhhhmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm ooooooooohhhhhhhmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm etc.
__________________
94 Emerald LS w/ awd 4.44 swap 199xxx daily driver Stage 2 ECUTune chip, 370cc injectors, ECUTune valve body and TCU, solid rubber motor mounts from a forester, outlaw phenolic spacers, COBBTuning lightweight blue crank pulley, Bontragerworks 22mm rear sway bar & endlinks, StrongFlex poly front sway bar bushings, Powergrid adjustable front sway bar endlinks, 17" MOMO CORSE RPM wheels w/ Toyo Proxes4 225/45, drilled/slotted rotors f/r, stainless lines, ceramic pads, Blue silicone radiator hoses, power mode switch, gold jdm hood badge, 20% tint all around, Hella optilux xtreme yellow fog bulbs parts waiting to go on car: the rest of the strongflex polyurethane suspension bushing set |
#212
|
|||
|
|||
Re: CAI Feeler
Ohmmmmmmmmmmmmmmmmmmmmmmmmm
__________________
94 Emerald LS w/ awd 4.44 swap 199xxx daily driver Stage 2 ECUTune chip, 370cc injectors, ECUTune valve body and TCU, solid rubber motor mounts from a forester, outlaw phenolic spacers, COBBTuning lightweight blue crank pulley, Bontragerworks 22mm rear sway bar & endlinks, StrongFlex poly front sway bar bushings, Powergrid adjustable front sway bar endlinks, 17" MOMO CORSE RPM wheels w/ Toyo Proxes4 225/45, drilled/slotted rotors f/r, stainless lines, ceramic pads, Blue silicone radiator hoses, power mode switch, gold jdm hood badge, 20% tint all around, Hella optilux xtreme yellow fog bulbs parts waiting to go on car: the rest of the strongflex polyurethane suspension bushing set |
#213
|
||||
|
||||
Re: CAI Feeler
How long until your legs go numb from the lotus position?
__________________
Disclaimer: The above post is on the internet. |
#214
|
||||
|
||||
Re: CAI Feeler
You might want to get up and stretch... This will take a while. I bought camber plates a year ago from Johnnybeas and after waiting 9 months I asked for my money back... 3-4 months later still no refund.
__________________
Former: 1994 Barcelona Red(x2), 1995 Brilliant Red, 1992 Liquid Silver, 1992 Ebony(x2), 1992 Pearl White (x2) Current: 2017 Ford Raptor 2017 Kawasaki KLR 1995 Guards Red Carrera 1995 Spec-ish Miata - track car 1957 CJ-5 |
#215
|
|||
|
|||
Re: CAI Feeler
As usual I'm blamed for stuff that's out of my control.
Bobby, Camber caster plates came in but were incorrect ones, I ordered the plates from K-Mac for both you and Icingdeath at the same time he received his in a timely manor. I waited two months for you just to submit payment for the plates originally, and Icingdeath had to wait a bit before I submitted his order because we were waiting on you so I didn't have to charge high shipping prices to both of you. I also sold you the plates at a significant discount, and extended the discount for you even though you didn't actually pay for the item until I had stopped the promo. K-Mac sent the incorrect ones for you and I have the Stage I's sitting here still, that I cannot sell, cannot return, and I don't have the capital to refund you on a part I payed K-Mac for. I've been sending multiple emails, I tried calling their number and paid for international calls and have yet to get a hold of them. Everyone else, It is tax season and myself as well as the businesses I've been working with have been very busy, I have had the aluminum annealed and it's been packaged and sent to the bender to bend and put together, I've been working out packaging and final details to get them out to you guys. I have pics of the material at the annealer's but haven't had time to upload the pictures yet. I also have pictures of the prototype test fitted into the box with the filter and couplers. I will update with what I can while I wait for the bender to do his job, and ship me back the completed intakes. After that they will be hardened, polished, one will be powdered, packaged and shipped. Next stage will be dyno time. I will schedule a few hours that I can do a pull on stock, pull with Motorsport Warehouse's Stage III, Our Stage I, Stage II, and Stage III. I will then create a map for the stage III for hydra users that can be added as an option to the Stage III intake. |
#216
|
|||
|
|||
Re: CAI Feeler
Here is a quick phone picture of the stage III prototype, sorry the quality isn't that great.
|
#217
|
||||
|
||||
Looks good, though it doesn't look like it goes through the fender?
Am I just not looking at it right?
__________________
"That which can be asserted without evidence can be dismissed without evidence." '92 Dark Teal SVX LS-L, >146,000m 3 pedals, 5 speeds., restoration underway. 2012 Honda Insight, slow but cute. |
#218
|
||||
|
||||
Re: CAI Feeler
Not looking at it right. It goes through the fender somewhere around that last coupler. Otherwise, the filter would be sitting where the ABS is.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#219
|
|||
|
|||
Re: CAI Feeler
Intake is lookin good Johnny. Thanks for the update. Glad to hear everything is moving along. Thanks for doing the work and logisitics for all this.
__________________
94 Emerald LS w/ awd 4.44 swap 199xxx daily driver Stage 2 ECUTune chip, 370cc injectors, ECUTune valve body and TCU, solid rubber motor mounts from a forester, outlaw phenolic spacers, COBBTuning lightweight blue crank pulley, Bontragerworks 22mm rear sway bar & endlinks, StrongFlex poly front sway bar bushings, Powergrid adjustable front sway bar endlinks, 17" MOMO CORSE RPM wheels w/ Toyo Proxes4 225/45, drilled/slotted rotors f/r, stainless lines, ceramic pads, Blue silicone radiator hoses, power mode switch, gold jdm hood badge, 20% tint all around, Hella optilux xtreme yellow fog bulbs parts waiting to go on car: the rest of the strongflex polyurethane suspension bushing set |
#220
|
|||
|
|||
Re: CAI Feeler
What he said, but yes on your stage II you will go into a maf adapter and maf after the 30deg bend where the last coupler is. After which you will attach to the last coupler and go into the wheel well.
|
#221
|
|||
|
|||
Re: CAI Feeler
Thank you, glad to see my work is appreciated by some people.
|
#222
|
|||
|
|||
Re: CAI Feeler
Quote:
Its been a month since the last update... any news, pics, numbers? |
#223
|
||||
|
||||
Re: CAI Feeler
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project '97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod Now a mod "over there" ............Photo album |
#224
|
||||
|
||||
Re: CAI Feeler
Quote:
Diablo 3 looks awesome, and it only took what, 12 years?
__________________
"That which can be asserted without evidence can be dismissed without evidence." '92 Dark Teal SVX LS-L, >146,000m 3 pedals, 5 speeds., restoration underway. 2012 Honda Insight, slow but cute. |
#225
|
|||
|
|||
Re: CAI Feeler
I think we're still waiting on Starcraft: Ghost.
__________________
'92 SVX LS Pearl White - 6mt |
|
|