The beginnings of a Megasquirt how-to guide

[icingdeath88]

Originally Posted by BackWoodsBob

Good info, really gotta sit down and re-read it all!

The DIY PNP kits seem like the best bang per buck as far as standalone control goes, I mean, as long as you don't mind taking your time you save 800$+.

Yea, those are a lot cheaper, but those use the MS2/Extra boards. You would have to go wasted-spark, and batch-fire with the injectors, unless you add another module for sequential injection. And a few other things aren't available as they are on the MS3/X, but not any that seem essential. Gotta make sure it can drive a 3-wire PWM IACV.

There will probably be some differences in wiring compared to mine, and some things will need to be figured out from scratch, as they are different from the MS3/X - knock control, etc. But it should work, and they are even cheaper. But you have to be able to build it.