Wheels that fit the SVX

[92 SVX]

Originally Posted by svxistentialist

Danny, we are in agreement here for once. I'm a big fan of all kinds of lips, and from a styling standpoint for me anyway a car looks "faster" with rims that have a lip.

But just to expand on my reservations about changing rims for looks reasons alone I'll add this:

our SVXes have an unusual offset and a not too common lug pattern so the difficulty for those that want a change of appearance is in finding anything aftermarket that will actually fit and work.

If you pick a rim of the correct configuration already in use then you have a reasonable possibility of getting a decent wheel that will fit without fouling.

If this rim that is already in use comes from a huge wagon or off-road vehicle, I contend it is unlikely this rim will be lighter than or as light as the standard SVX wheel. It will have been designed for durability rather than racing.

If however this rim is already in use on a sportscar, the Mazda RX7 and RX8 come to mind, then in this instance the wheel will/may be designed to keep unsprung weight low, and may prove to be lighter than the SVX rim even though bigger diameter.

That's my case, pure and simple. Restrict your choice of style to wheels that come from sports cars, and leave the wagons to the pinstripe wellie brigade.

Joe

I know the offset is higher then most cars I have seen, but the lug pattern seems to be very common. 5 x 114.3.

[SilverSpear]

I wanted to share this a long time ago. Here is something interesting about wheel weights. Shame the bolt pattern is not listed (it is also not complete)

[svxistentialist]

Originally Posted by SilverSpear

I wanted to share this a long time ago. Here is something interesting about wheel weights. Shame the bolt pattern is not listed (it is also not complete)

Great lists Danny. Thanks.

Subaru Legacy Spec B '06, 18 lbs. The search is over.

And I don't disagree with you on everything Dan. Just noses and bodywork.

Joe

[SilverSpear]

Originally Posted by svxistentialist

Great lists Danny. Thanks.

Subaru Legacy Spec B '06, 18 lbs. The search is over.

And I don't disagree with you on everything Dan. Just noses and bodywork.

Joe

Wish the Legacy Spec B rim was a little wider. But 7 is too thin.

I am looking for something between 8.5 and 9 following the offset. What is good in my book in terms of weight, looks and dimensions are:

1- Volk RE30 Forged (18x8.5) 17.0 lbs
2- OZ Forgiata Forged (18x8.5) 16.5 lbs
3- BBS RE-Mg Forged Mg (18x8.5) 15.4 lbs

Of course there are other models which are also sweet in design, but I have chosen the lightest there is (the Volk is 3lbs lighter than the OEM Mazda RX8 rim). But do not ask about prices

I am druiling (a new word Joe, with ui instead ) over the Volk RE30. Wish someone can photoshop it on MY SVX.

Here is the rest of the list, with PICTURES

[svxistentialist]

Druiling, eh?

You been reading some of my sarcastic posts Danny?

I can't agree with your Volk choice for reason stated above, it has 10 stud holes. If you are going to spend a small fortune upgrading a car please don't put wheels on it that look like they came from the local tuning shop or off another car.

The SVX deserves wheels that look like they were designed for the SVX, not for the SVX and A N Other.

The other two I like a lot, they would be very good.

My choices from the pictures [thanks again for the link BTW] would be:

Advan Racing RS Cast18x9 @17.7 lbs
Dymag Mg/CF 18x9 @14 lbs
Fikse FM10 18x8.5 @18 lbs
RS Watanabe Cyclone Forged Mg 18x9 @16.1 lbs
Volk TE 37 Forged Mg 18x8.5 @16.1 lbs.

What have all these got in common, aside from being sorta light?


5 holes.

Joe

[SilverSpear]

Originally Posted by svxistentialist

My choices from the pictures [thanks again for the link BTW] would be:

Advan Racing RS Cast18x9 @17.7 lbs
Dymag Mg/CF 18x9 @14 lbs
Fikse FM10 18x8.5 @18 lbs
RS Watanabe Cyclone Forged Mg 18x9 @16.1 lbs
Volk TE 37 Forged Mg 18x8.5 @16.1 lbs.

What have all these got in common, aside from being sorta light?


5 holes.

Joe

Joe, nice choices, but what do you mean by 5 holes? is it the bolt holes? Because if you are talking about the holes within the bars of the rims, then I think you got yourself mixed up a little bit. Especially the first two rims. The description is always for the rim below.

I love Advan a lot, but they cost around $5k this is why I didn't chose them. The others except Volk, are rare rims, just in case I damage one, I will have a hard time finding a replacement.

Volk, OZ and BBS are common, and can be bought USED at a somehow reasonable price.

Please can you explain what do you mean by 5holes? because the first two have at least 8 rim holes in them.

Dan

[svxistentialist]

Originally Posted by SilverSpear

Joe, nice choices, but what do you mean by 5 holes? is it the bolt holes? Because if you are talking about the holes within the bars of the rims, then I think you got yourself mixed up a little bit. Especially the first two rims. The description is always for the rim below.

I love Advan a lot, but they cost around $5k this is why I didn't chose them. The others except Volk, are rare rims, just in case I damage one, I will have a hard time finding a replacement.

Volk, OZ and BBS are common, and can be bought USED at a somehow reasonable price.

Please can you explain what do you mean by 5holes? because the first two have at least 8 rim holes in them.

Dan

It's just me being snobby Danny.

When I say 5 holes I mean the 5 stud holes or bolt holes.

If you compare your RE 30 rim with the TE 37 rim I selected, you will see that in the TE series there are only five holes at 114.3 centres for bolting the wheels to the hub.

In the case of the RE rim it has 10 holes. 5 of them are at 114.3 centres, and I would guess that the other 5 are possibly at 5 x 100 or some other fitment.

The RE 30 wheel looks absolutely beautiful, but I would not use it because it is dual fitment.

Snobby, like it told you.

Joe

[svxistentialist]

Originally Posted by 92 SVX

I know the offset is higher then most cars I have seen, but the lug pattern seems to be very common. 5 x 114.3.

I would not disagree with that. The offset is what makes our cars stand out. Or the wheels stand in.

5x114.3 is not too uncommon as you say, but over here the aftermarket wheel industry is geared for tarting up smaller cars, so the replacement wheel industry commonly carriers lug patterns to suit Toyota Starlets and Peugeot 206s and all sorts of rubbish.

This can mean with a 5 stud wheel that the only way you can get it is with dual lug pattern, 10 holes, so it suits more vehicles. On principle alone I would not fit such a wheel to my car. It looks naff. It looks aftermarket. Not for me thank you.