SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
|
|||
|
|||
building engines and turboing 2 svx's woot woot!
Ok so as I've illuded to in a few other threads, the time has come that my dreams will become a reality. Myself and another member will be starting on building two svx's and turboing them, with end result goals upwards of 500 hp in the end. So the two svx's here's what the plan is parts wise:
Johnybeas 1992 SVX LS-L Tranny: 02 wrx 5mt (already installed) built with ppg group N rally gears ECU: Hydra Nemisis II (already installed) Superru 199? SVX Tranny: STi 6mt ECU: Hydra Nemesis II The rest of the parts we will prob both do most are decided but some are still up in the air a few more months of research saving and rouning up parts to go still but here's the list as of today... Turbo parts Turbo: garrett gt4088r Blow off valve:hks ssq Boost controler: aem Waistgate: tial 38mm Intercooler: perrin stealth Muffler: flowmaster 80 series 3in. One or two? Catalitic converter: flowmaster or magnaflow? Piping: 2 1/2 in. Downpipe 3in. Up pipe 3in equal length headers, 3 in. turbo back exhaust. 3 1/2 in tips or bigger Engine build parts Spark plugs: ngk Injectors: rc 1000cc Fuel pump: denso 300lph Cams: custom Rods: eagle h-rods Pistons, rings, and pins: cp pistons 8.5:1 Bearings: acl race bearings Spacers: outlaw engineering phenolic spacers Head bolts and studs: arp Head gasket: cometic Last edited by Johnybeas; 05-03-2010 at 11:31 AM. |
#2
|
|||
|
|||
Re: building engines and turboing 2 svx's woot woot!
For my particular turbo I'm contemplating doing an a/r of about .80 for a faster spool for auto xing
|
#3
|
|||
|
|||
Re: building engines and turboing 2 svx's woot woot!
Got your txt, but i was passed out! ya that looks like a great list of stuff to get!! i'm working on the exhaust piping now, i'm trying to get some 314 stainless from a buddy. i'm going to pull my engine in about a month so i need something to play with while i'm awaiting that 6spd..
__________________
uhh ya it's a subaru |
#4
|
||||
|
||||
Re: building engines and turboing 2 svx's woot woot!
Good luck guys! Can't wait to see some them come together.
__________________
Chris 92 Ebony Mica LS-L "A Rolling Restoration": 223,250 KM - Sleeping 2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos 2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold 2020 Ram 1500 Longhorn - Red Pearl |
#5
|
||||
|
||||
Re: building engines and turboing 2 svx's woot woot!
this is going to be interesting
|
#6
|
|||
|
|||
Re: building engines and turboing 2 svx's woot woot!
Quote:
|
#7
|
|||
|
|||
Re: building engines and turboing 2 svx's woot woot!
Good luck guys. I was gunna say I have some bearings I could sell you, but if you split parts with each other you won't have any short or left over.
|
#8
|
|||
|
|||
Re: building engines and turboing 2 svx's woot woot!
contemplating RC Engineering 1000cc injectors because they are a few bucks cheaper than the 550cc STi ones from Subaru after my discount.
|
|
|