WTB: Trans Dowel Pins

Cam · #1 01-23-2011, 06:37 PM

I need 1 pin that aligns the trans to the engine. There are 2 on the trans, 1 left and 1 right. They are tapped into the bellhousing and extend past to align the engine with the trans.

Thanks guys!

icingdeath88 · #2 01-23-2011, 08:28 PM

You're sure the missing one's not on the engine, right?

I can ship you one tomorrow if you want, but FL -> WA shipping would probably be a lot.

Cam · #3 01-23-2011, 08:56 PM

I am positive. I had a tranny swap done when I first bought the car, very possible the donor trans did not have both.

Let's do it. Let me know what shipping is. I will PM you my details..

(p.s. I almost didn't recognize you with the new picture

)

pile o' wrx · #4 01-30-2011, 05:45 PM

Cam,

Go run on down to a wrecking yard with a pair of vice grips. Any Suby, at least I'm sure of the modern ones, are all the same.

I have more than a few sitting in my toolbox.

Cam · #5 01-30-2011, 07:26 PM

I was able to turn one down from a 7/16th" dowel rod from home depot. But next time I am at a wrecking yard I will stock up.