Thread: Confirm Tran mount part #41022PA070
View Single Post
  #3  
Old 09-11-2006, 03:07 PM
svxfiles's Avatar
svxfiles svxfiles is offline
There's a storm coming.
  
Join Date: Dec 2001
Location: Wiley Ford WV
Posts: 8,650
Significant Technical Input Registered SVX
You should NOT have to drop the exhaust to change it.
If you safely support the tranny by the pan, (using of course a flat wooden board to protect the trans pan) remove the rear trans mount (6 bolts) and the four bolts from the mount to the trans, and the three holding the mount to the crossmember, it should wiggle out.
Good luck.
__________________
www.svxfiles.com
The first SuperCharged SVX,
the first 4.44 gears,
the first equal length headers,
the first phenolic spacers,
the first Class Glass fiberglass hood,
the first with 4, 4.44s in his driveway

Fiberglass Hood thread
My locker
4.44 Swap link
Reply With Quote