Thread: hose nipple?
View Single Post
  #7  
Old 04-18-2013, 09:47 AM
icingdeath88's Avatar
icingdeath88 icingdeath88 is offline
some sort of nerd. some sort.
Subaru Silver Contributor
 
Join Date: Aug 2009
Location: Tampa, FL
Posts: 3,560
Registered SVX
Re: hose nipple?

http://www.wuala.com/dbarnblatt/Phot...812,1576615,15

Open "svx92-94_parts_5trans.pdf", then go to page 126. You're missing part # 18.

There are supposed to be two breather hoses, the other one is on page 146. Double check that you have that one too. It's probably more visible from the driver's side.

You don't necessarily need to have those exact lines, shaped exactly that way, but you do need a line attached to each fitting, with the other end pointing downward.

The purpose of the breathers is to allow the trans to release pressure, but not allow dirt, water, and other crap into the trans. So it's not a super urgent thing to fix, but definitely worth fixing.
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project

'97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod

Now a mod "over there" ............Photo album
Reply With Quote