|
Re: thoughts on polishing engine parts...
Are you pulling the engine out of the car? That's going to be an uber-tedious job with the motor assembled and in the engine bay. You won't be seeing very good results unless you want to take a grinder and clean all the casting roughness off the block. Just to see what would happen, while I was polishing some engine bits (PWR rad, A/C lines...) I took my Dremel to a small spot on the rear of the intake. Looks like junk. It produces a darker grey colour with tiny, shiny spots.
__________________
Chris
92 Ebony Mica LS-L " A Rolling Restoration": 223,250 KM - Sleeping
2007 STi 6MT, Stance GR+ coilovers, PWR Rad, JDM hood badge, svxfiles 6000K HIDs, JDM Clear Corners, $15/15 min mod, $20/20 min mod, Energy Swaybar Bushings, Hella Supertones horns, Gold STi BBS rims, Group A lightweight crank pulley, A/C system removed, Custom header-back exhaust, Hybrid carbon/metal rear sway bar, restored headlights with CCFL halos
2008 Subaru Legacy Spec B - Diamond Grey Metallic - Sold
2020 Ram 1500 Longhorn - Red Pearl
|