Re: Crankshaft socket
Quote:
Originally Posted by Crazy_pilot
What I've always done to rotate the crank is just install the crank pulley bolt finger tight and use it to turn the whole assembly. Just keep turning to the right, unless there's something very wrong with your rotating assembly it won't tighten up much turning and can easily be snapped loose after.
|
^That's what I did when I did the timing belt last time.
__________________
'94 Laguna Blue LSi ~159k .......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project
'97 Ebony LSi ~137k #036 .......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod
Now a mod "over there" ............Photo album
|