Quote:
Originally Posted by oab_au
The three wires on the SVX unit, are the two normal wires, with a shield wire, to stop any interferance getting in. The Legacy may not have the shield on the wires.
I wonder if the drive gear has a different tooth angle?
Harvey.
|
Since all the transmissions I have looked at were WV and MD transmissions, there is NO UNIFORMITY TO THE TEETH!!!
OK, that was fun....
As long as the teeth were of the same #, and they drove each other, the angle is not important.
However, the HAL effect speedometer sensor COULD be affected by the distance when seated. I do not know this for certain, but it "sounds logical"
Harvey, can the third wire be a shielding wire if it does not surrond the two pulse carring wires?