Quote:
Originally posted by AFBeefcake
I felt an impromevent then I installed them on my car.
I use Energy Suspension 9.5121R for the rear and 9.5105R for the front.
The 9.5105R are the same hight as the OE ones but there wider.
I cut them down and drilled them out. no spaceres needed.
|
I found an old post, 5-15-03,
bushings
ok, its 5-15, and i installed the bushings. the 9.5105G kit, the bushing can be ground or drilled out to 18mm, i ground out the right side to 18 by wearing out the grinding stone from 3/4" with a piece of metal. (i could not find a 18mm drill) i olso had to saw off 1/2 "of the outside end of the bushing so it would clear the bend in the sway bar. did the drivers side first, without grinding or trimming it, so ill have to go back and hone it out, but the thickness is fine. nothing squeeks or bangs. the car seems more responsive.when im awake friday morning, it will get a better test flying the kids to school on winding bumpy roads.