Thread: Tranny cooler
View Single Post
  #6  
Old 01-24-2011, 04:37 PM
svxfiles's Avatar
svxfiles svxfiles is offline
There's a storm coming.
 
Join Date: Dec 2001
Location: Wiley Ford WV
Posts: 8,650
Significant Technical Input Registered SVX
Re: Tranny cooler

Quote:
Originally Posted by Huskymaniac View Post
There is a recent long thread on this subject. Tranny cooler is nice but why is under debate. Many people believe the biggest benefit is the reduced flow resistance relative to the internal radiator based cooler. If that is true and heat is more a symptom than a cause, one doesn't need a high capacity cooler. The radiator cooler is probably in the area of 2000-4000 GVW. In fact, if you go too high, your torque converter will be slow to lock up. Also, a high capacity cooler will have a large footprint which, I believe, to be undesirable since most people place it in front of the radiator. Everything restricts airflow, even if just a little. So I went with a 10,000 GVW cooler from flex-a lite. It has low flow resistance and a small footprint. It is larger than the stock cooler but not as high capacity of some of the monster coolers other have used.

Other nice items are:

1. Synthetic fluids in the tranny AND differentials is a great idea. I like Redline because it is ester based and esters are wetting agents that improve heat transfer. Tom likes BG Products which also make nice products. Mike likes Subaru dino ATF with Lubegard in the red bottle. Lubegard is a great additive which is based on esters.
2. Mike's TCU upgrade. He can describe the advantages better than I can.
3. Mike's valve body upgrade.
4. A cheap alternative to #2 is to increase the dropping resistor's resistance slightly. From my understanding, it helps a little but not as much as #2.
5. Some people have argued that driving in 3rd gear around town helps. The main arguments have been that the car does not hunt between 3rd and 4th, the strain on the tranny's parts is reduced and the fluid pumps harder/faster. The last point is the one that is most debated based on the pump design.

I had to take a long drive today in 24-26°f weather, driving a
1)4.44 SVX with
2)a huge transmission cooler,
3)no external filter,
4)factory trans cooler bypassed, and
5)BG Products synthetic fluid in it.
All five of these changes lower the transmission temperature.
The highest trans temperature that I saw was 140°f even though I was driving at 3000rpm, about72 mph.
When the temp dropped to 138°f, it would unlock the torque converter.
The cooler in this SVX is a 15,7/8"total width, and 7,1/2" tall.
It is a Hayden/Imperial #242016 that has six passes.
For a summer car, or a Southern States car its might still be a little on the big side.
__________________
www.svxfiles.com
The first SuperCharged SVX,
the first 4.44 gears,
the first equal length headers,
the first phenolic spacers,
the first Class Glass fiberglass hood,
the first with 4, 4.44s in his driveway


Fiberglass Hood thread
My locker
4.44 Swap link
Reply With Quote