Quote:
Originally Posted by Huskymaniac
I checked their website and used their parts selector tool and that first part did not come up. Maybe their parts selector tool is not so great.
|
And slow. Just give them a call.
Quote:
Originally Posted by Huskymaniac
Is that sensor screwed into the engine or does it actually go through the wall all the way into the coolant path? This does seem pretty easy though.
|
It is screwed into the coolant crossover tube under the intake manifold.
Just remove the wire connection, (its a blade terminal so it pulls right off) use a 12mm deep socket on a 6" extention and unscrew it and replace it with a new one.
Do it while the engine is cold.
You will lose a little coolant so be prepared to switch them quickly.
You don't want any animals do drink the green coolade!