Quote:
Originally Posted by TomsSVX
Also, the cams can be flipped upside down. They have alignment marks 180* on the gears.
If it does... pop the pulley on the exhaust cam and pull the cap seal off the intake cam and make the keyway for the exhaust pulley point straight up... The intake's keyway should be in the same position
If all is well... check on the other side too for proper keyway positioning... If all is well.... Light it all on fire cuz the motor is comming out
Tom
|
What YT is saying is to make sure the Passenger side cam keyway grooves are pointing the same way, both up , and the Drivers side cam grooves are pointing the same way, but both down.
Naturally this is with the crankshaft set to its 0° position.