View Single Post
  #7  
Old 08-06-2010, 09:39 PM
svxfiles's Avatar
svxfiles svxfiles is offline
There's a storm coming.
 
Join Date: Dec 2001
Location: Wiley Ford WV
Posts: 8,650
Significant Technical Input Registered SVX
Re: Burned Headlight Socket!

Quote:
Originally Posted by benebob View Post
Also be sure to get the correct wattage headlight. Higher wattage=more heat=melted housing. Check the ground real good to it as well as make sure it is greased up real good. Check the other as well.
Part of the problem is the Silver Stars themselves.
Yes they are brighter, but it is a result of higher resistance inside of the bulb created to cause the bulb to burn brighter.
Our 9006 low beams only have 1000 lumins, so technically speaking they suck!
They are listed as 55 watt bulbs and the Silver Stars have 65 watts, as I remember.

A new connection mil spec soldered in and properly insulated is a must first!


PS;
If you installed a set of HIDs, a 5000K, 9006 replacement would use much less power, only 35 watts and give 3000 lumins.
Three times the light output with less energy used, and less heat generated.
__________________
www.svxfiles.com
The first SuperCharged SVX,
the first 4.44 gears,
the first equal length headers,
the first phenolic spacers,
the first Class Glass fiberglass hood,
the first with 4, 4.44s in his driveway


Fiberglass Hood thread
My locker
4.44 Swap link

Last edited by svxfiles; 08-06-2010 at 09:43 PM.
Reply With Quote