![]() |
Completion of the Stage III 6-speed
The 6-speed conversion has started.
The FWD sadly requires a little extra work. The rear subframe doesnt have the mounting points for the rear. here's a few pictures. Rear subframe http://www.subaru-svx.net/photos/files/mikecg/34243.jpg Under Rear http://www.subaru-svx.net/photos/files/mikecg/34245.jpg Interior (I need to clean under the seats a little more often) http://www.subaru-svx.net/photos/files/mikecg/34246.jpg |
Looks like you may need some upgraded bushings for the rear differential :D
Seems you've got a good start on your conversion there! |
swap is comming along very well. Still need a couple things but I am doing what I can with what I have. BTW Mike, the 5mt starter will work with the 6speed trans so that means a wrx starter will work as well..... Not sure about the legacy starters etc.... I will see if that guy still has his for sale.... $35 you cannot beat. Still need a set of rear axles for an Sti if anyone has them...
Tom |
Will it be at Reading?
|
Whoa cool. I was wondering what you were doing since the thing went boom.
|
Yes it will be at Reading as long as Mike can make it there. With any luck I will have the parts to finish it by next weekend. My source for a 3.90 R160 failed so now I am frantic trying to find R180 axles. Starter should not be an issue as the 5mt starters are a dime a dozen... Loading pics, will be up shortly
Tom |
R180
http://www.subaru-svx.net/photos/fil...sSVX/34281.JPG AWD vs FWD subframe http://www.subaru-svx.net/photos/fil...sSVX/34282.JPG Clutch master mounted http://www.subaru-svx.net/photos/fil...sSVX/34283.JPG Clutch and brake pedals mounted http://www.subaru-svx.net/photos/fil...sSVX/34285.JPG Group N motor mounts to lower engine 1/4"(hood clearance issues) http://www.subaru-svx.net/photos/fil...sSVX/34288.JPG Couple X-member shots(not finished, I am letting it cool as we speak) http://www.subaru-svx.net/photos/fil...sSVX/34289.JPG http://www.subaru-svx.net/photos/fil...sSVX/34290.JPG http://www.subaru-svx.net/photos/fil...sSVX/34291.JPG Motor mounts installed http://www.subaru-svx.net/photos/fil...sSVX/34292.JPG Just a tranny shot http://www.subaru-svx.net/photos/fil...sSVX/34293.JPG Enjoy! I am back to work Tom |
Tom,
Nice, very nice!! Seems that we now have the "Tom Team" .... See Tom J. for 5/6 spds....See Tom K. for 4.44 Autos :cool: :cool: -Bill |
Tom:
That looks terrific. Can't wait to see it in person. |
X-member is finished and prepped for paint... Now onto the shift linkage:D
Tom |
Tom your like a ****ing machine.....god bless you man :D
|
Quote:
;) :D |
Ok, quick post before I go to work. Shift linkage has been tacked... all 4 peices are ready to be fitted. Once I know they are right... it is off to the races with the rest of the car. I will try and take more pics tonight but cannot promise anything. Mike, looks like all we will be waiting on this week is parts as I should have it "mostly" done tomorrow
Tom |
Quote:
And I know your gonna let me take it for a spin at Reading....right Mike??? :) |
Your hands are never goingto get clean now Tom! :p
Awesome work buddy. Looks like you're the the man on the East Coast for 5/6 spd swaps!!!!!! :cool: |
All times are GMT -6. The time now is 03:37 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122