SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Ignition switch pics
Well I finally got tired of fighting the ignition switch's intermittent start problem and didn't feel like messing with the relay mod to comphensate for the cruise control inhibitor relay issue, so I went ahead and replaced it with a new one. It took a couple of hours, which was longer than I had expected, but not too bad considering I had to mess with the remote start wiring too.
Anyways, here are some pics of the switch assembly and the allen head bolt, as well as the OEM security bolt. I don't recall ordering the security bolts, but they were on the invoice and didn't cost much so I wasn't going to fight it. You can see where the head is designed to twist off at the desired torque and then you have a problem if you ever want to get it off again. For anyone needing to replace or tighten them, I would suggest replacing them with the allen head bolts like I did. KuoH |
|
|