The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > Regional SVX Forum & Clubs > US Regional Forums > Northeast Region

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 06-15-2005, 03:13 PM
black beast black beast is offline
Back Road Blazer
 
Join Date: Jan 2005
Location: New Boston, NH
Posts: 501
Send a message via AIM to black beast
Cool What do you guys think?

Ok everyone, what do you think about this?

We have an SVX meet in NH?

Merrimack NH, for example, that way it is close to the Mass people (RT 3) and near the middle of NH. It is right off the highway and it has ample parking. I want to have a meet in NH so I thought I would start one, why not?

Respond, ok?
__________________
-Chris
'94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc.
Reply With Quote
  #2  
Old 06-17-2005, 07:01 PM
RedHotSVX RedHotSVX is offline
gettin there....
 
Join Date: Apr 2005
Location: Bradford,Ma
Posts: 120
Send a message via AIM to RedHotSVX Send a message via MSN to RedHotSVX Send a message via Yahoo to RedHotSVX
Thumbs up Meet in N.H.

I'd be up for that.
I live in Bradford(Haverhill),and work in Nashua,so Merrimack would be a good location for me
__________________
Mike....
8/96......Vin 100109
1997 LSI,18 inch Axis wheel(summer),16 inch ALT wheels(winter),Trans temp/Volt gauges,Iridium plug's, Autotechnica intake,silverstar high/low and fogs,polyurethane sway bar bushing's front and rear,Smallcar shift kit,Stebro exhaust finally..SWEET!!
Motorsports drilled/slotted rotor's front and rear with ceramic pads and SS brake lines.
1997 SUS Legacy,finally got the engine in after a year!!
My Locker
www.myspace.com/devilhornz
Reply With Quote
  #3  
Old 06-19-2005, 07:10 PM
black beast black beast is offline
Back Road Blazer
 
Join Date: Jan 2005
Location: New Boston, NH
Posts: 501
Send a message via AIM to black beast
Ok that would be a really crappy turn out. I am going to ask a few local companies to help out. Ample space and a lot of SVXs come on guys, this will be fun.
__________________
-Chris
'94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc.
Reply With Quote
  #4  
Old 06-19-2005, 07:22 PM
Subafreak's Avatar
Subafreak Subafreak is offline
Superbeast
 
Join Date: Aug 2002
Location: Central Village Ct.
Posts: 4,330
Hay it sounds like a good idea, as long as you have a good meeting spot and perhaps a nice little cruise route planned out.
__________________
92 SVX #772 140k 6speed, ECU Tune stage II, Koni/Ground control, 3,270lbs.
91 Legacy Turbo 5spd. FMIC, crappy stock turbo, ACT clutch.
78 BRAT (New toy) (Soon to be EJ22T powered)
90 240 SX. RB25 powered!! DRIFT!!!111!!! (GF's car)

To many cars to spend time on teh web!
Reply With Quote
  #5  
Old 06-19-2005, 09:25 PM
AFBeefcake's Avatar
AFBeefcake AFBeefcake is offline
Subaru Swapper
 
Join Date: Aug 2002
Location: Griswold, CT
Posts: 1,779
Send a message via AIM to AFBeefcake
I'm up for a meet. I would just have to fight for the day of work.
__________________
2005 Legacy GT
2002 WRX VF22, Pinks, big TMIC and turbo back 128,*** miles
My WRX's Cardomain Page
Reply With Quote
  #6  
Old 06-19-2005, 10:04 PM
kuroneko_sama's Avatar
kuroneko_sama kuroneko_sama is offline
aka sir_romeo
 
Join Date: May 2005
Location: Lake Sunapee, NH
Posts: 714
Send a message via MSN to kuroneko_sama Send a message via Yahoo to kuroneko_sama
they do a street night in concord on loudon rd where the dq used to be its either a tues or thurs, but there are all kinds of cars there, it would be cool though to have a band of svx's convoy in
__________________
I Leave late and STILL manage to arrive early
Car #26..'97 SVX Silver (120k and climbing)
previous SVXi:
Car #24..'94 SVX Ebony 216k (sold)
car #18..'97 SVX LSI "Ebby" Pearl 175k (sold)
car #19..'97 SVX LSI Brilliant Red 103k (sold)
car #14..'92 SVX Claret LS-L Touring (sold)
car #13..'94 SVX Laguna Blue LS (sold)
Reply With Quote
  #7  
Old 06-20-2005, 08:26 AM
black beast black beast is offline
Back Road Blazer
 
Join Date: Jan 2005
Location: New Boston, NH
Posts: 501
Send a message via AIM to black beast
The reason I said Merrimack was it is right off the highway, and it is right between NH and Mass. As the NH people are not big into going to meets, I thought our Mass side would be also willing to so up. Merrimack, next to a lot of hick towns so a good cruisen roads, curvy and very few cops. And Romeo, could you provide the sic? And it is a very large parking lot ample space for us. And I think we should first do a SVX only meet, that way we can get our roots first, then move on up, also NH has a lot of SVXs for a small area so I thought that it would draw them out too if it was svx only.
__________________
-Chris
'94 ebony pearl, with orange "silicone" hoses, painted beauty cover, Tom's Intake, Dayles Cold air intake; with HKS mega suction foam air filter, 3in header back exhaust, STI ground wires, euro front fascia, euro front grill, reactive 17in wheels, Nitto Invo's, Drilled and slotted rotors, stainless break lines, Koni strut inserts, Drop springs, 5MT, shotshifter, Clutchmasters clutch, ACT prolite flywheel, EL Glow gauges, The ECUTune stage 2. To Do: Cams, port and polish, etc.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122