SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
HELP!!! Tranny trouble and shift kit
I need help bad...
I just had my tranny re-rebuilt and had the Transgo shift kit installed. 4 days later the tranny is slipping at start off and between every shift. Before this started I really didn't notice much difference in the characteristics of the tranny, as in the feel of the shift and when it shifts. I understand there are other benefits to the shift kit, I expected more. Should there be more? Also, could the misapplication of the kit be causing my new troubles? I have to get this thing back in right away so any "quick" response would be appreciated. Randy ii |
#2
|
||||
|
||||
Wish I had a good answer for you. The only time I've seen a tranny slip from a stop it was low on ATF.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#3
|
|||
|
|||
Tell your mechanic to check the brake band adjustment. Just a possibility. I am in the process of rebuilding my 92 right now. Don't run the trans any more than you have to until the problem is fixed. Slipping can cause irreversible damage.
|
#4
|
|||
|
|||
de,
Thanks for the reply. I have it back again and it's fine now. There was a problem with the a duty solenoid. The car is now happy and so am I. Good luck on your rebuild. You might want to squeeze a cup holder in there somewhere. Randy ii |
|
|