SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
window
Guys
I know a lot of you have told me the clip is the issue. This is my problem: The pass. side window does not go down. There is power to the motor. The wire that pulls up/down the window is tight and would like to move but the window itself does not move. What do I do? How do I fix it? Where is the clip at? Lwin
__________________
Lwin M. Maung (Member # 147) Current SVX: NONE Previous SVXes: 1994 LE Barcelona Red 107k 1992 LS-L Pearl White 143k 1994 LSi Bordeaux Pearl 220k 1992 LS-L Ebony Pearl 184k 1992 LS-L Liquid Silver 145k 1992 LS-L Liquid Silver 102k 1992 LS-L Ebony Pearl 123k Other current cars:2001 Jeep Grand Cherokee Black If at first you don't succeed, CHEAT!
|
#2
|
||||
|
||||
no one has fixes?
Lwin
__________________
Lwin M. Maung (Member # 147) Current SVX: NONE Previous SVXes: 1994 LE Barcelona Red 107k 1992 LS-L Pearl White 143k 1994 LSi Bordeaux Pearl 220k 1992 LS-L Ebony Pearl 184k 1992 LS-L Liquid Silver 145k 1992 LS-L Liquid Silver 102k 1992 LS-L Ebony Pearl 123k Other current cars:2001 Jeep Grand Cherokee Black If at first you don't succeed, CHEAT!
|
#3
|
||||
|
||||
Lwin, I'm not sure where the clip is, but, if you go to the "how to" locker, you'll find a link to my Yahoo Briefcase. In my briefcase is a diagram of the window internals. Check it out.
__________________
Randy Johnson 3rd Registered Member 02-21-2001 First Member to Reach 10,000 Posts First to arrive at the very first Reading Meet Subaru Ambassador 1992 SVX PPG Pace Car Replica 110+k 1993 White Impreza L 240+K miles 2001 Legacy Outback Limited Sedan 250+K miles 2013 Deep Indigo Pearl Legacy 3.6R 49+K miles "Reading is my favorite Holiday" Mike Davis -- at Reading VI |
#4
|
|||
|
|||
The dreaded clip
If your 'clip' is busted, the traveling wire will move but the window will not move properly. I figure this clip thing is a sort of mechanical fuse that would give way rather than damage the window or other components in a lock up situation. Unfortunately, it just wears out after high useage (mine was no doubt cratered by daily fast food drive up useage).
If the clip goes, you may have to tape your window up as I did. Please use clear packing tape as it looks better to those admiring your car. |
#5
|
||||
|
||||
Mine broke just before Autofest. As I recall, I wasn't totally put off by the repair cost, but I don't remember what it was.
I just checked (it's raining). Wife seems to have moved the paperwork from the glove box. Can't help ya with the price.
__________________
Steve '95 Polo Green SVX L AWD, 188K - "Kermit" (Gone, but not forgotten) '02 Outback LLBean, 56K '02 Black Sapphire Volvo V40, 133K - "Shadowfax" '06 Triumph Tiger, 19K '99 Suzuki DR350SE, 8.5K - "Geezer Killer" <*}}}}>< ~ ~ ~ ~ ~ ~ ~ ><{{{{*> |
#6
|
||||
|
||||
Re: The dreaded clip
Quote:
__________________
Lwin M. Maung (Member # 147) Current SVX: NONE Previous SVXes: 1994 LE Barcelona Red 107k 1992 LS-L Pearl White 143k 1994 LSi Bordeaux Pearl 220k 1992 LS-L Ebony Pearl 184k 1992 LS-L Liquid Silver 145k 1992 LS-L Liquid Silver 102k 1992 LS-L Ebony Pearl 123k Other current cars:2001 Jeep Grand Cherokee Black If at first you don't succeed, CHEAT!
|
#7
|
|||
|
|||
Clip Problems
I had provided a response to your questions but my browser timed out before I could complete and lost it all. Will write tomorrow, must get up early tomorrow to provide income for my automotive 'pets'.
|
#8
|
|||
|
|||
Trying again...
Faster this time...
After you remove the door panel and the plastic waterproofing sheet stuck to the door with tar (ick) you will see the rail that the window rides up and down on. The regulator assembly rides on the rail and contains the clip. If the clip is not broken you should be able to see a bead attached to the traveling wire secured in the middle of this regulator assembly. The window assembly rides on this bead and after enough stress the clip will break. I have heard that subaruparts.com sells the clips for a pittance. Most dealers will want to sell you the window lift assembly for around $200 bucks. Installation of this entire assembly is a pain. You will need an impact driver to remove screws from the window motor |
#9
|
||||
|
||||
Musta been a virus
Quote:
__________________
bill Green 95 SVX - Cleo Green 97 Outback - Maxine Red F-150 Extended Cab Long Bed - Big Boy Even the best monkey sometimes drops his banana. |
#10
|
||||
|
||||
Re: Trying again...
Quote:
__________________
bill Green 95 SVX - Cleo Green 97 Outback - Maxine Red F-150 Extended Cab Long Bed - Big Boy Even the best monkey sometimes drops his banana. |
#11
|
||||
|
||||
CLIP Part number
Just talked to Scott at subaruparts.com about the infamous window clip, which breaks and is attached to the regulator assembly. He is not aware of this clip being available as a separate part.
However my next post shows that assumption to be false.
__________________
. Subaru Ambassador 1996 Polo Green LSi #216..138,100 miles...SOLD JFICX8659TH100216.....Date of Manufacture: November 16, 1995..... Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan In-Service Date: January 2, 1997 "The Pristine Green Polo Machine First Polo Green on the Network First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000) First 5000K HID factory fog lights (2007) First SVX JDM BBS wheels on a USDM SVX (2013) HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler. R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 2007 Mazda Miata MX-5 PRHT...102,000 miles. Plenty of parts, service and windshields. 4th Registered Network member 2/21/2001 My NEW locker..I...My Email..I..Wikipedia/SVX . . Last edited by svxcess; 09-25-2004 at 12:15 AM. |
#12
|
||||
|
||||
Try this one:
62101PA081 I didn't get this part from subaruparts.com, but from my Suby dealer.
__________________
bill Green 95 SVX - Cleo Green 97 Outback - Maxine Red F-150 Extended Cab Long Bed - Big Boy Even the best monkey sometimes drops his banana. |
#13
|
||||
|
||||
GREAT PART NUMBER!!
62101PA081 is a sleeve lock regulator. It is a redesign of the clip and is found starting with the 94 SVXs. Scott says it will clip onto the place where the 92-93 window clip used to be. Evidently there was a problem with this clip and so Subaru decided to offer this as a replaceable part starting in '94. Check here: http://www.subaruparts.com/diag/?mod...category=601-1 Cost of the part is $7.58 from subaruparts.com and about $10.00 from your dealer.
__________________
. Subaru Ambassador 1996 Polo Green LSi #216..138,100 miles...SOLD JFICX8659TH100216.....Date of Manufacture: November 16, 1995..... Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan In-Service Date: January 2, 1997 "The Pristine Green Polo Machine First Polo Green on the Network First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000) First 5000K HID factory fog lights (2007) First SVX JDM BBS wheels on a USDM SVX (2013) HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler. R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 2007 Mazda Miata MX-5 PRHT...102,000 miles. Plenty of parts, service and windshields. 4th Registered Network member 2/21/2001 My NEW locker..I...My Email..I..Wikipedia/SVX . . Last edited by svxcess; 09-25-2004 at 12:47 AM. |
|
|