Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
|
SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
|
#1
01-01-2006, 12:09 PM
|
||||
|
||||
WTB: right front complete hub and knuckle assembly
Wanted: complete passenger front hub and knuckle (housing) assembly with wheel bearing intact. Preferably from a wreck that had a good wheel bearing and it all needs to be in one piece to be swapped in.
I can ship back my ABS tone wheel (it is fine) after my bad hub/knuckle is removed. I don't think this can be removed without pressing the hub out of the knuckle/bearing and I know these are expensive and you'd probably want to sell it separately. My bearing is shot and judging by the amount of play in it the hub or knuckle is probably shot too. Going to replace entire unit at once if I can get the parts. Anyone have one from a lower mileage part-out? Parts I need are circled in this pic Needs to be AWD. 
__________________
Matt Locker Link 2015 BRZ Limited 6MT 92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting 92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles 19 Subaru Ascent Premium - -Hers !. 89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P. Last edited by immortal_suby; 01-01-2006 at 04:43 PM. 
|
|
|
Threaded Mode