The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Wanted or For Sale > SVX's and SVX Parts Wanted > SVX Parts Wanted

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 08-17-2009, 12:45 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Looking for a few odds and ends... or at least just the p/n's

I'm looking for a few bits for the interior of my SVX, or at least the part numbers for them if anyone knows.

All parts are for a 1994 LSi:

- Driver's door sill guard (beige)
- Passenger "oh shoot" handle, just the rear screw cover (beige)
- Trunk release handle (beige)
- Driver's seatbelt (beige) <- probably only need the webbing, mine's starting to fray a little
- A/C dash control unit, just the button bezel (in GRAY, not fake wood...)

Thanks in advance!
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #2  
Old 08-17-2009, 03:18 PM
Manarius's Avatar
Manarius Manarius is offline
1995 Subaru SVX LSi Polo Green
 
Join Date: Jul 2005
Location: Grantham, PA (Near Harrisburg)
Posts: 2,119
Send a message via ICQ to Manarius Send a message via AIM to Manarius Send a message via MSN to Manarius Send a message via Yahoo to Manarius Send a message via Skype™ to Manarius
Registered SVX
Re: Looking for a few odds and ends... or at least just the p/n's

Quote:
Originally Posted by sperry View Post
I'm looking for a few bits for the interior of my SVX, or at least the part numbers for them if anyone knows.

All parts are for a 1994 LSi:

- Driver's door sill guard (beige)
- Passenger "oh shoot" handle, just the rear screw cover (beige)
- Trunk release handle (beige)
- Driver's seatbelt (beige) <- probably only need the webbing, mine's starting to fray a little
- A/C dash control unit, just the button bezel (in GRAY, not fake wood...)

Thanks in advance!
Seatbelt may have a lifetime warranty that the dealer can service.
__________________
-Jason
(8/23/07-Present) 1995 Subaru SVX LSi (197k) Polo Green (#1102) 03/95
Mods: DDM Tuning 4500k 35w Low Beam HID, 100w H3 Bulbs, Extra Ground Cables, 15 minute $12.96 mod,
svxfiles designed transmission mount (), sporting a "new" tail light bar,
silver BBS rims, custom power steering cooler (one that doesn't dump ATF constantly), new negative lead cable, no more third or fourth gear
(1977-Present) 1977 Chevrolet Corvette (81k) Silver
(12/01/2011-Present) 2005 Subaru Outback 2.5i Limited 5MT (97k)
I have a bad feeling about this.
-Obi Wan Kenobi
Reply With Quote
  #3  
Old 08-17-2009, 04:08 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Re: Looking for a few odds and ends... or at least just the p/n's

Quote:
Originally Posted by Manarius View Post
Seatbelt may have a lifetime warranty that the dealer can service.
Interesting... thanks for the heads up!
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #4  
Old 08-17-2009, 07:55 PM
Ryansmagic Ryansmagic is offline
Registered User
 
Join Date: Jun 2009
Location: Central WI
Posts: 46
Re: Looking for a few odds and ends... or at least just the p/n's

If the dealer won't take care of the seatbelt, I have one from a 97'
I also have the truck release handle I think(I'll have to double check to make sure its in good shape)

Pm me if interested

Quote:
Originally Posted by sperry View Post
I'm looking for a few bits for the interior of my SVX, or at least the part numbers for them if anyone knows.

All parts are for a 1994 LSi:

- Driver's door sill guard (beige)
- Passenger "oh shoot" handle, just the rear screw cover (beige)
- Trunk release handle (beige)
- Driver's seatbelt (beige) <- probably only need the webbing, mine's starting to fray a little
- A/C dash control unit, just the button bezel (in GRAY, not fake wood...)

Thanks in advance!
Reply With Quote
  #5  
Old 08-17-2009, 07:59 PM
trophy956 trophy956 is offline
Registered User
 
Join Date: Aug 2009
Location: wallingford,ct
Posts: 175
Re: Looking for a few odds and ends... or at least just the p/n's

subaru seat belts are life time 95 and up .and the gray bezels are painted over the wood any way
Reply With Quote
  #6  
Old 08-17-2009, 08:40 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: Looking for a few odds and ends... or at least just the p/n's

All parts are for a 1994 LSi: Why are you looking for a gray A/C panel for an LSi (wood grain)?

Driver's door sill guard (beige) 94010PA090DO $48.78

Passenger "oh shoot" handle, just the rear screw cover (beige) 92031PA040DO $2.13

Trunk release handle (beige) 57346PA010DO $8.85

Driver's seatbelt (beige) probably only need the webbing, mine's starting to fray a little.

A/C dash control unit, just the button bezel (in GRAY, not fake wood...) 72032PA190 $66.47 This should be the gray one from the LS model.


.
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.
Reply With Quote
  #7  
Old 08-18-2009, 04:18 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Re: Looking for a few odds and ends... or at least just the p/n's

Quote:
Originally Posted by svxcess View Post
All parts are for a 1994 LSi: Why are you looking for a gray A/C panel for an LSi (wood grain)?

Driver's door sill guard (beige) 94010PA090DO $48.78

Passenger "oh shoot" handle, just the rear screw cover (beige) 92031PA040DO $2.13

Trunk release handle (beige) 57346PA010DO $8.85

Driver's seatbelt (beige) probably only need the webbing, mine's starting to fray a little.

A/C dash control unit, just the button bezel (in GRAY, not fake wood...) 72032PA190 $66.47 This should be the gray one from the LS model.


.
Great info!! Thanks a ton.

I'm looking for a gray A/C panel because I've painted my wood dash black, but to preserve the A/C back-lighting, I had to mask off the text on the panel. So I've got little wood labels on the A/C panel that look retarded. I wanted to start over w/ a gray panel and paint it black so the masked text has a gray background instead of pseudo-wood.
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #8  
Old 09-29-2009, 05:30 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Re: Looking for a few odds and ends... or at least just the p/n's

Bump.

Okay, I got all the above bits, sans the A/C button bezel (72032PA190)... no explaination from SubaruParts.com, but I'm guessing the part just isn't available. Maybe I'll try my local dealership and see what they can tell me.

Also that P/N for the door sill trim (94010PA090DO) was actually the small carpeted kick panel trim piece that's just to the left of the brake pedal, not the long plastic door sill trim piece that's parallel to the seat and covers where the carpet snaps into the body under the closed door.

So, I need two more part numbers because for whatever reason I can't find interior trim pieces on the SubaruParts.com lookup system:

- The driver's side door sill cover (in beige)
- The rear window wiper interior trim cover (in beige)

Anyone know the P/N's for these bits, or better yet a way to pull up the interior bits online somewhere so I don't have to keep asking?
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #9  
Old 09-29-2009, 06:42 PM
redlightningsvx's Avatar
redlightningsvx redlightningsvx is offline
Collision Refinishing Tech
 
Join Date: Aug 2007
Location: Huntingdon, PA
Posts: 2,279
Registered SVX
Re: Looking for a few odds and ends... or at least just the p/n's

Door sill #'s are 94016PA000MD and 94016PA010MD. Thes are the numbers I have when I bought mine (grey) but for some reason I cant pull up a diagram on subaruparts to see if beige has different numbers. Also the rear wiper cover you can't buy as it's not listed. Here's a site I just found off of subaruparts that show the sill but no part numbers. http://www.trademotion.com/partlocat...layCatalogid=0
__________________
Seth
94' Barcelona Red w/ Tricoat black 2-tone AWD Ls -Sold
Mods:AWD conversion/4.44 swap by Budfreak, Custom red interior lights, Custom Satin black dash, Power mode switch, Cold air intake, Permecool tranny filter,Sony xplode 10" sub, Sony xplode 1000w amp, Blitz in-line driver, DDM Tuning 6000k HID's, New paint job/body work by me, 97' Grill, QC shift kit, 17'' MB Motoring rims, 15&20 min mod, front & rear urethane swaybar bushings, Custom fiberglass sub box, Custom red led a/c control unit, perrin lightweight crank pulley, Black wrinkle finish powdercoated intake manifold w/ clear hoses , 02' outback heated/power black leather seats
Soon to come:Fiberglass hood, upholster ALL suede to black leather
Past subies:

92' Pearl White/black top LS-L-SOLD
96' Legacy Outback-TOTALED
99' Legacy Outback Limited 30th anniversary edition-TOTALED
98' Forester L -Totaled
Other toys:
99' Forester S -WRX brake upgrade, soon an 04 wrx motor swap
06' B9 Tribeca-Stock
1982' Yamaha xj650 Maxim
Mods:
work in progress

Last edited by redlightningsvx; 09-29-2009 at 06:46 PM.
Reply With Quote
  #10  
Old 10-01-2009, 05:48 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Re: Looking for a few odds and ends... or at least just the p/n's

Anyone else (*cough* svxcess *cough*) care to chime in? Or am I off to my local Subaru parts department?
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #11  
Old 10-02-2009, 06:22 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Re: Looking for a few odds and ends... or at least just the p/n's

Went to my local dealer's excellent parts counter:

For future reference:

- Rear wiper shaft interior trim cover (beige): 86538PA000D0
- Driver's door sill cover (beige): 94016PA010D0 (only 5 left in the US after I get mine )
- A/C unit bezel (gray): 72032PA190 (P/N above was correct, but there are none left in the US... the dealer is trying to order from Japan because it's not officially discontinued, but who knows if there are any left there)
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #12  
Old 10-22-2009, 05:15 PM
sperry's Avatar
sperry sperry is offline
$1 is just $1, but $2 = nachos
 
Join Date: Jun 2004
Location: Reno, Nevada
Posts: 358
Re: Looking for a few odds and ends... or at least just the p/n's

Just a small update. That A/C bezel part number is useless. There are no more of them left. Period. It's discontinued.

So, anyone have a gray A/C bezel in a parts car they're willing to sell me?
__________________
3 turbos, 28 cylinders, 96 valves, 18 cams, 1400hp/1600ftlbs: '09 Outback XT / '06 Outback Sedan / '02 WRX / '94 SVX / '01 F-250 SuperDuty
Reply With Quote
  #13  
Old 10-22-2009, 05:49 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: Looking for a few odds and ends... or at least just the p/n's

Quote:
Originally Posted by sperry View Post
Anyone else (*cough* svxcess *cough*) care to chime in? Or am I off to my local Subaru parts department?
.....TIP: When searching for beige parts for the SVX on Subaruparts.com, always use the 1993 model. it will always give you the trim numbers for both colors.

.....Part numbers ending in MD are gray. part numbers ending in DO are beige.

.....94016PA000DO Cover Side Sill Right, Beige (#4)
.....94016PA010DO Cover Side Sill Left, Beige (#5)

.....

.....Found in the 1993 section.
.....Go to Sealing and Trim subsection.
.....Go toTrim Panel Inner (lower)



.....86538PA000DO Shaft Cover/ rear wiper (#15 in diagram)
Unless you want #3, which is 86538PA020 Head Cover

.....

.....Found in 1993 section
.....Go to Electrical parts subsection
.....Go to Rear Wiper.

.....You will see the numbers for beige and gray.


.....

.
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122