SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
||||
|
||||
small repairs
where are all the screws that hold down the center console? mine moves around alittle and makes a very annoying noise at high speeds. also, how do you tighten up some of the false wood trim in the dash?
__________________
-Dustin 1992 Ebony LS-L w/191k miles Mods: a few and acouple more 1995 Brilliant Red L/AWD w/154k miles Mods: Stebro catback exhaust, K&N drop in filter, ECUtune ST1v5, 4.44, lots of JDM goodies 1992 Pearly LS-L w/154k miles Sold Mods: 4.11, rust 2008 DGM Legacy spec.B w/245k miles Mods: Cryotune Stage3, VF52, bushings galore, STi pink springs, Bilstein HDs My Locker The only man alive who drives three "Subu SVS's".......according to my insurance company Last edited by odepaj; 09-20-2004 at 04:12 PM. |
#2
|
|||
|
|||
I don't know that I remember them all, but there's one (or two) on each side in the front under the little plastic piece (to the side & kinda under the radio area).
Then there's the likely culprits, the screws under the felt pad inside the center console box. The fix (cheapo) I used was to fit some large thin metal circles (the surround for tacking down roof tar paper - think thin fender washers) around the screws as the housing can crack or wobble and this makes it a lot more secure. I have read several threads on this & I'm sure others used amore elegant solution...try the search feature for "console", something will come up. |
#3
|
||||
|
||||
I cut a floor tile to fit in the bottom of the console then put 3 corresponding holes in it for the screws. Console hasn't wiggled since!
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
Thread Tools | |
Display Modes | |
|
|