The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Technical Q & A

Reply
 
Thread Tools Display Modes
  #1  
Old 08-15-2002, 09:28 PM
vkykam's Avatar
vkykam vkykam is offline
The Road Less Traveled
 
Join Date: Mar 2001
Location: Toronto, ON, Canada
Posts: 824
Unhappy Snap, Crackle, Pop.

No, I'm not talking about Rice Crispies here.

That's pretty much what I heard after closing the drivers side window this evening. Window no longer opens, although you can hear the window motor spinning away.

I remember something about a little piece of plastic that's prone to breaking in there? Does anyone have a fix for that before I tear the door apart?

Thx.

VK
Reply With Quote
  #2  
Old 08-16-2002, 12:09 AM
Earthworm's Avatar
Earthworm Earthworm is offline
Meow!
 
Join Date: Mar 2002
Location: Winnipeg, Manitoba
Posts: 11,957
Send a message via ICQ to Earthworm Send a message via AIM to Earthworm Send a message via MSN to Earthworm Send a message via Yahoo to Earthworm Send a message via Skype™ to Earthworm
Yeah, it's just that little plastic piece. If you do a search you should be able to find the part number for it. ($10)

The part should have been originally made from aluminum.

Be aware that not the only thing holding up your window is tension and the window will eventually drop after a good bump.
Reply With Quote
  #3  
Old 08-16-2002, 07:04 AM
vkykam's Avatar
vkykam vkykam is offline
The Road Less Traveled
 
Join Date: Mar 2001
Location: Toronto, ON, Canada
Posts: 824
I guess I'll just have to duct tape it in the meantime.

VK
Reply With Quote
  #4  
Old 08-16-2002, 04:18 PM
immortal_suby's Avatar
immortal_suby immortal_suby is offline
Thread Killah
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
Registered SVX
You don't need the plastic piece if it only broke at the end. There is some adjustment in the wire's length at the motor and you can tie a knot in the end of it and attach it to the window frame to make it work. If the cable is too short or broke in the middle a brake cable for a bicycle will work ($1.99 @ walmart)
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
Reply With Quote
  #5  
Old 08-19-2002, 11:36 AM
Chris's Avatar
Chris Chris is offline
Founder / Administrator
 
Join Date: Feb 2001
Location: Boise, Idaho
Posts: 928
Send a message via ICQ to Chris
darn it

If anyone has the part number, it would be much appreciated. Mine just broke and my local dealer thinks it can only be got with an order of the whole regulator assembly. Big bucks! He did say that a part number might exist for it and if so, he can order it.... So, whats the part number?
__________________
-- Chris
Founder/Administrator SVX World Network

ECU Tune (stage 1), PWR (prototype aluminum radiator)
Amateur Radio - General Class - K7SVX
#1 92 Teal LSl 246k (Dedicated SVX Race Car, now with 4.44 speed)
#2 92 Teal LSl 125k (Retired, car rescued from a field of weeds)
2007 Impreza 2.5i Special Edition, Obsidian Black Pearl (Daily driver)
2001 Dodge Ram 2500 quad cab, Cummins turbo diesel 4x4 (race car & RV hauler)
1985 Honda VF500 Interceptor (fair weather fun commuter)

Going on 11 years of NHRA bracket racing
NHRA Div 6 Car/Driver # T654 (site being rebuilt, new name is www.teamsvxracing.com)
2000 1st Place Club Challenge Series
2002 3rd Place Season Track Champion, Import Racing (Firebird Raceway)
2003 4th Place Season Track Champion, Import Racing (Firebird Raceway)
2003 1st Place NW Regional Import Shootout (July 5th)
2004 1st Place Club Challenge #1 (Firebird Raceway)
2004 1st Place NHRA "King of the Track" race
2004 NHRA Gold Cup 2nd place season win
2004 Import/Sport Compact 3rd place season win
2004 Division 6 Summit/ET NHRA Race of Champions finalist competitor (Mission, BC)
2007 1st Place Import Survival #3
2007 1st Place Track Champion Import Summer Jam (Wild Street Class)
2007 1st Place Import Survival #5
2008 Club season 1st place win, Club Champion
2008 2nd Place Season Import Final.
2008 Division 6 Summit/ET NHRA Import Finals (Woodburn, Or)
2009 2nd Place Import Summer Jam (Wild Street Class)
2010 1st Place Club race #2 - 1st place Sport Compact race #1 & #2
Reply With Quote
  #6  
Old 08-19-2002, 12:09 PM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
62101PA081 is a sleeve lock regulator. It is a redesign of the clip and is found starting with the 94 SVXs. Scott says it will clip onto the place where the 92-93 window clip used to be.

Evidently there was a problem with this clip and so Subaru decided to offer this as a replaceable part starting in '94. Check out here:

http://www.subaruparts.com/diag/?mod...category=601-1

Cost of the part is $7.58
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.

Last edited by svxcess; 09-25-2004 at 12:27 AM.
Reply With Quote
  #7  
Old 08-20-2002, 07:54 AM
Chris's Avatar
Chris Chris is offline
Founder / Administrator
 
Join Date: Feb 2001
Location: Boise, Idaho
Posts: 928
Send a message via ICQ to Chris
SVXCESS, you rock! Thanks for the information. I really appreciate it. Part is ordered and be here on Friday. No more vice-grips to hold the window up!
__________________
-- Chris
Founder/Administrator SVX World Network

ECU Tune (stage 1), PWR (prototype aluminum radiator)
Amateur Radio - General Class - K7SVX
#1 92 Teal LSl 246k (Dedicated SVX Race Car, now with 4.44 speed)
#2 92 Teal LSl 125k (Retired, car rescued from a field of weeds)
2007 Impreza 2.5i Special Edition, Obsidian Black Pearl (Daily driver)
2001 Dodge Ram 2500 quad cab, Cummins turbo diesel 4x4 (race car & RV hauler)
1985 Honda VF500 Interceptor (fair weather fun commuter)

Going on 11 years of NHRA bracket racing
NHRA Div 6 Car/Driver # T654 (site being rebuilt, new name is www.teamsvxracing.com)
2000 1st Place Club Challenge Series
2002 3rd Place Season Track Champion, Import Racing (Firebird Raceway)
2003 4th Place Season Track Champion, Import Racing (Firebird Raceway)
2003 1st Place NW Regional Import Shootout (July 5th)
2004 1st Place Club Challenge #1 (Firebird Raceway)
2004 1st Place NHRA "King of the Track" race
2004 NHRA Gold Cup 2nd place season win
2004 Import/Sport Compact 3rd place season win
2004 Division 6 Summit/ET NHRA Race of Champions finalist competitor (Mission, BC)
2007 1st Place Import Survival #3
2007 1st Place Track Champion Import Summer Jam (Wild Street Class)
2007 1st Place Import Survival #5
2008 Club season 1st place win, Club Champion
2008 2nd Place Season Import Final.
2008 Division 6 Summit/ET NHRA Import Finals (Woodburn, Or)
2009 2nd Place Import Summer Jam (Wild Street Class)
2010 1st Place Club race #2 - 1st place Sport Compact race #1 & #2
Reply With Quote
  #8  
Old 08-21-2002, 04:16 PM
vkykam's Avatar
vkykam vkykam is offline
The Road Less Traveled
 
Join Date: Mar 2001
Location: Toronto, ON, Canada
Posts: 824
Price of part from local dealer: $8.84CDN.

Pics are in my locker for the disassembly process.

1) Remove felt from door handle/storage, and remove 3 screws.
2) Remove panel from underneath door opening latch/handle, and remove 2 screws.
3) Remove 2 screws at the "front" of the door, and pry the door panel from the bottom to remove. Panel is held in place by plastic snaps.
4) Remove the trim/armrest support by removing the two screws. Peel back plastic for weather proofing.
5) Adjust the window motor cable using the power window switch until the little "nut-looking" piece on the cable is in this area. Fit the "sleeve lock regulator" onto this "nut". Adjust window manually about 1/2 way down. You will see the black metal support attached to the glass, with a square opening in the middle. Put sleeve lock regulator into opening and slide into place for a snug fit.
6) Reverse removal procedure.

Time: Less than 30 minutes.

Who said this car is expensive to fix?

(I should learn to keep my mouth shut in case my car hears me and breaks something expensive...)

VK
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122