SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Cleaning IAC
Has anyone done this without removing the throttle body? It looks like you could remove it from under the throttle body without removing the throttle body. Any thoughts?
|
#2
|
||||
|
||||
Haven't tried yet. I'm probably going to remove the TB and clean both at the same time.
__________________
David B. SVXipedia @ SVX-IW.COM -- SVX Information Warehouse 2.0 coming...eventually! Ebony 1992 SVX LS-L 5 spd Koni/GC Stebro 187k miles RIP (Rust In Pieces) 1993 SVX 5 spd Koni/GC Stebro Polyurethane bushings still available! |
#3
|
||||
|
||||
Its not hard to remove the throttle body itself. Overall, I'd imagine the job would be easier if you first removed the complete throttle body and then pulled the IAC from the throttle body.
__________________
Mychailo :: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ :: 1995 Laguna Blue SVX L AWD 5MT (sold) Visit my locker SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads. |
#4
|
||||
|
||||
i just sprayed throttle body cleaner into the hose for the iac until it had a puddle of cleaner in it then i lightly blew it threw by blowing on the hose. do it 2 or 3 times and see what happens.
|
|
|