SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Need CV joints ?
I'm helping out an SVX owner in Tokoroa who needs a CV joint for his car.
Searched the parts books, trawled Hansen's and found they're about $250. Went into a SAS Group outlet here in Hamilton and they came up with three options, all less than $100 each. They seemed confident they would work. http://sasgroup.co.nz Could be worth a crack next time you need suspension parts. |
#2
|
||||
|
||||
Re: Need CV joints ?
Shane,
let us know how you go with the CV stuff - is it for a "normal" SVX or 4WS model ?. Just doing a visor fix for my car - The JDM/Aus/NZ visors are different p/n than the ones from USA, the internal material & mechanisim is different, but my fix could be done for both. I will finish documenting it over the weekend.
__________________
1995 LSI, Added the following - Gear Firm-Up unit (that I sell) together with Power TCU ROM & Power switch, K&N air filter, SVX side badges (USA type), Rear Deck Blower (JDM type), Side front markers (USA type), Side rear markers (USA type), Middle rear light (USA type), USA OEM Fog Lights fitted into NZ OEM glass (NZ OEM headlights had only reflectors fitted) Full set of yellow (90SH) Polish bushes includes 15 min mod, R1 Concepts drilled/slotted/gold finish rotors & Red covered braided brake lines (both from Dayle at Motorsport warehouse), EBC Redstuff brake pads. Full SVX bra (only used for shows). Koni adjustable inserts fitted inside OEM strut body, Zoom lowering springs (2" lower), OEM headlight washers fitted. |
Thread Tools | |
Display Modes | Rate This Thread |
|
|