I broke this hose...part number?

[dwd1985]

While attempting to adjust my TPS properly, I pulled off oone of the intake manifold hoses, and pulled too far, and the hose was too old and brittle, and it snapped off. Anyone got a part number for this hose? Its the thick black hose that (would) connect to the open port on the drivers side of the intake manifold. Part number anyone?

[Speedklix]

I'm in a rush, so I can't bother with it right now.... but this should point you in the right direction if no one else gets it: http://www.subaru-svx.net/photos/fil...czko/30337.pdf

[Earthworm]

I believe you're referring to part number 807907202 for $7.81 from subaruparts.com

[dwd1985]

Turns out its part number 807412162. Thanks for the help though guys.
In case anyone cares, its part number 7 here: http://www.subaruparts.com/diag/?mod...category=036-A

[dwd1985]

Seems I am not so sure anymore. If you take a look at the diagram that I linked in the previous post, and look at part 7 like I specified, that part has hose clamps on the top and bottom of it. However, my hose didnt have hose clamps at all, and didnt appear to need them. I looked up the part number that earthworm specified, and it just took me directly to the price report screen, without seeing a diagram. If I saw a diagram with earthworms part number on it, I would be able to tell if that were the right part. anyone know where I can find a diagram at?

[Earthworm]

I got it right from subaruparts.com

[dwd1985]

http://www.subaruparts.com/diag/?mod...ategory=063-A1

Diagram and part found! It part 7 in this diagram. And its definetly not the one I need. Im pretty sure that the part that I need is the one I found before, the one with the clamps. But then why does that hose in my diagram have hose clamps, but the one on my SVX didnt?