The Subaru SVX World Network   SVX Network Forums
Live Chat!
SVX or Subaru Links
Old Lockers
Photo Post
How-To Documents
Message Archive
SVX Shop Search
IRC users:

Go Back   The Subaru SVX World Network > SVX Main Forums > Wanted or For Sale > SVX's and SVX Parts Wanted > SVX Parts Wanted

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 02-05-2013, 03:18 PM
Svx95's Avatar
Svx95 Svx95 is offline
eg33svx95
 
Join Date: Jun 2011
Location: Yankton, SD
Posts: 243
Registered SVX
VSS2 Harness Wanted

I am looking to buy a harness to the vehicle speed sensor 2. It is for a 1995 SVX L AWD. The wires broke off at a very crucial point of the harness and its nearly impossible to solder them back together. This is what I am looking for ----> IMAG0146.jpg

Thanks
__________________
Sam
Brilliant Red 95 SVX L AWD 149K miles - #904/1801, 08 STI 6MT with DCCD & VSS, ACT SB10 HDSS, 6MT bushings, DW200 Fuel pump, 17x7.5 VX-SCYTHE Wheels, 17x8 BBS STI Wheels,PERRIN CRANK PULLEY, 911 Turbo oil filter,$15/15min MOD & $20/20min Mod, Brontrager WORKS 22mm RSB w/ QS component endlinks, SS Brake Lines, DDM TUNING 6000K HID LOWS, Hella Optilux Extreme Yellow Fog Lights,Window scratcher fix, JDM Clear Corners

My Locker
Reply With Quote
  #2  
Old 02-05-2013, 05:01 PM
North Ursalia North Ursalia is offline
Hi Mr. Penguin!
Subaru Silver Contributor
 
Join Date: Jul 2010
Location: New Hampshire
Posts: 373
Registered SVX
Re: VSS2 Harness Wanted

Worst case scenario you can push the pins out of the connector, remove the old wires, and solder new wires on to extend to a place where you can more easily fix things. A paper clip will usually do the trick, but failing that, a large sewing needle will work to unhook the little clips on the pins.
Reply With Quote
  #3  
Old 02-05-2013, 06:56 PM
icingdeath88's Avatar
icingdeath88 icingdeath88 is offline
some sort of nerd. some sort.
Subaru Silver Contributor
 
Join Date: Aug 2009
Location: Tampa, FL
Posts: 3,560
Registered SVX
Re: VSS2 Harness Wanted

Quote:
Originally Posted by Svx95 View Post
I am looking to buy a harness to the vehicle speed sensor 2. It is for a 1995 SVX L AWD. The wires broke off at a very crucial point of the harness and its nearly impossible to solder them back together. This is what I am looking for ----> Attachment 17034

Thanks
I feel like you didn't check my post in the other thread...
__________________
'94 Laguna Blue LSi ~159k.......JDM ultra short-geared 3.900 STi Version 7 6-speed w/ Cobb shortshifter, ECUtune 244,8.1mm/256,9.1mm i/e cams, group N motor mounts, '97 grille, JDM clear corners, Momo JDM Legacy GT steering wheel, apkarian's LED tails, silver STi BBS wheels, PWR radiator, redstuff pads f/r, drilled/slotted rotors, bontragerworks rsb #18, Koni/GC 450f/375r coilovers, Megan Racing adjustable lateral links, KMac c/c plates, Stebro exhaust, ECUtune 1v5, Optima battery in the trunk where it belongs. Turbo project

'97 Ebony LSi ~137k #036.......Power mode mod, JDM clear corners, BBS wheels. AUX/pocket mod

Now a mod "over there" ............Photo album
Reply With Quote
  #4  
Old 02-06-2013, 08:58 AM
1986nate 1986nate is offline
Senior Member
Subaru Silver Contributor
 
Join Date: Sep 2008
Location: Meadville, PA-but I'll still travel
Posts: 4,672
Registered SVX
Re: VSS2 Harness Wanted

I think I have a few with about 6-12" of wiring from ones I yank from the pick n pulls. I'll have to check.
Reply With Quote
  #5  
Old 02-06-2013, 09:27 AM
dbarnblatt's Avatar
dbarnblatt dbarnblatt is offline
Registered User
 
Join Date: Oct 2009
Location: Venice, CA
Posts: 401
Registered SVX
Re: VSS2 Harness Wanted

Quote:
Originally Posted by North Ursalia View Post
Worst case scenario you can push the pins out of the connector, remove the old wires, and solder new wires on to extend to a place where you can more easily fix things. A paper clip will usually do the trick, but failing that, a large sewing needle will work to unhook the little clips on the pins.
Agree... easy repair. Fixed a connector on our Mazda a few days ago where the wires broke off right where they meet the connector. Took the pins out, soldered new wire, and connected back up. Took about 20 minutes.
Reply With Quote
  #6  
Old 02-06-2013, 10:15 AM
Svx95's Avatar
Svx95 Svx95 is offline
eg33svx95
 
Join Date: Jun 2011
Location: Yankton, SD
Posts: 243
Registered SVX
Re: VSS2 Harness Wanted

Quote:
Originally Posted by icingdeath88 View Post
I feel like you didn't check my post in the other thread...
Yes, I failed to check...woops. sorry!
__________________
Sam
Brilliant Red 95 SVX L AWD 149K miles - #904/1801, 08 STI 6MT with DCCD & VSS, ACT SB10 HDSS, 6MT bushings, DW200 Fuel pump, 17x7.5 VX-SCYTHE Wheels, 17x8 BBS STI Wheels,PERRIN CRANK PULLEY, 911 Turbo oil filter,$15/15min MOD & $20/20min Mod, Brontrager WORKS 22mm RSB w/ QS component endlinks, SS Brake Lines, DDM TUNING 6000K HID LOWS, Hella Optilux Extreme Yellow Fog Lights,Window scratcher fix, JDM Clear Corners

My Locker
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122