"real" jdm spoiler ???

[aust92pearl]

looks like a real one the seller has another so called jdm one that is green but its not the jdm shaped one

http://cgi.ebay.com/ebaymotors/JDM-S...item5633efd082

[icingdeath88]

black one looks jdm, the green one looks like a regular US one. it's also cheaper, so makes sense.

does the jdm spoiler use the same mounting holes as the US one?

[aust92pearl]

*EDIT

im not sure but they look like they are fairly close by comparison but i dont know ?
jdm (only):
link on first post

(rest of the world)dm:
http://cgi.ebay.com/ebaymotors/JDM-S...item3ef18bda22

[svxistentialist]

Since both spoilers originate from the factory in Gunma it's a safe bet they are the same.

Also it is commonly presumed that the taller wrap-down-the-sides type of spoiler is the one and only JDM type because it was made available only in the home market for 91-93 models Version L and Version E. It is not generally appreciated that the "US type" was also available in the home Japanese market later on for the SVX.

So like they are both "real"

And the "US type" was also available in the UK, Australia and in Continental Europe.

just thought you should know these things.

Joe

[icingdeath88]

Interesting, I had not read that before.

[hairy]

Originally Posted by svxistentialist

Also it is commonly presumed that the taller wrap-down-the-sides type of spoiler is the one and only JDM type ...................... It is not generally appreciated that the "US type" was also available in the home Japanese market later on for the SVX.

So like they are both "real"

It's true you know.....................here is the spoiler on my '95 JDM.

[Green1995SVX]

Originally Posted by icingdeath88

black one looks jdm, the green one looks like a regular US one. it's also cheaper, so makes sense.

does the jdm spoiler use the same mounting holes as the US one?

Yes, and no. The JDM type wing uses two of the same holes, but the other two must be drilled out to accommodate it. If you open your trunk lid and look inside, you can see where you're supposed to drill the second set of holes.

Mike